1.2GHz 2.4GHz 50W 47dbm signal blocker power amplifier jammer module
If you are currently troubled by drones, or you want to find a product to deal with annoying drones, the TX-PD240050 anti-drone module must be a good product. It releases interference signals through radio frequency, and the image transmission channel of the drone will lose contact with the remote control due to the interference signal. Thereby protecting personal safety and privacy.
TX-PD240050 is an anti-drone module developed and manufactured by Shenzhen Texin Electronics. The module has a flat bandwidth and can run stably at a voltage of 24-28V. It uses high-performance aluminum alloy materials with long life and good heat dissipation.
Features:
■ Customized 300-2700MHz
■ Operate in 24-28V voltage
■ 47dbm gain feature
■Full wattage and stable output
■Aluminum material and high heat dissipation
■ Wireless module support wifi drone GPS usage
■ Industry Standard and 100% original designed
Applications
■ Key area protection :Government ,Nuclear power plant, oil depot Protection of sensitive areas
■ Large event security:The module plays an important role in leadership travel, large-scale entertainment activities and concerts, etc.
■ Privacy Protection:Prevent drones from secretly photographing and snooping on personal privacy and business secrets
■ Maintaining public safety:Combating the use of drones for criminal activities
2.4GHz 50W RF Power Amplifier Specification | ||||
NO | Item | Data | Unit | Notes |
1 | Frequency | 400-2700 | MHz | |
2 | Work Temperature | -40~+65 | ℃ | |
3 | Max Output Power | 50w | W | |
4 | Work Voltage | 24/28 | V | |
5 | Max Gain | 47 | dB | |
6 | Flatness | ±1 | dB | |
7 | Max Current | 4 | A | |
8 | Output VSWR | ≤1 | ||
9 | Output Connector | SMA/F | Ω | |
10 | Power Amplifier Efficiency | |||
11 | Switch Control | high low level current | V | Customized |
12 | Standing Wave Protection | OK | when Max Output | |
13 | Temperature Protection | 75° | ℃ | 0V off /0.6 on |
14 | Size | 120*53*19 | mm | |
Weight | 248 | g |
Caution!
Power supply needs to carry 24V 4A
If the output power is greater than 5W and above, it is recommended to strengthen the heat dissipation treatment, such as adding a heat sink or adding a fan.
When connecting, you must first screw on the antenna, then connect the front-end source device, and finally supply power
Company files