Product introduction
The 100W high power super frequency band 4800-6200MHz bidirectional amplifier produced by famous manufacturer Shen ZhenTexin Electronic Co.,Ltd.,The module uses radio frequency technology and can amplify the received signal through the output port when connected to an antenna.Its biggest feature is its wide bandwidth, which can cover over 1000MHz. The average power can reach 100W when used at 32V. This feature is very suitable for machines with high power consumption and can ensure stable output during operation.
If you want a high power and ultra-wide bandwidth power amplifier, don't think about it, this is definitely a super cost-effective product
Features
Specification
No. | Item | Data | Unit |
1 | Frequency | 4800-6200 | MHz |
2 | Test voltage | 28-32 | V |
3 | Current | 16 | A |
4 | Output | 100 | W |
5 | Gain | 50 | dB |
6 | Output stability | 1 | dB |
7 | Connector | N / Female | |
8 | Output connector VSWR | ≤1.30 (No power and VNA test) | |
9 | Power supply wire | Red+Black+Enable wire | |
10 | Enable Control | High ON Low Off | |
11 | Out shell Size | 220*110*26 | mm |
12 | Work Temperature | -40~+65 | ℃ |
13 | Out shell material | Aluminum | |
14 | Vibration need | Car load OK | |
15 | Standard input | 5 | dB |
16 | Weight | 1.35 | kg |
Attention
*Please be sure to connect the antenna before use to avoid burning the module due to power failure
*When the temperature is too high, please install a heat sink to avoid damage to the amplifier due to excessive temperature
*Please connect an antenna with the correct impedance to avoid damage to the amplifier due to incorrect antenna connection
*If you encounter any technical problems, please consult the technicians in time and do not operate at will.
Why choose us