Temporary Pool Fencing Hire Melbourne Cost Around 50 linear meters for 450$ so if you run a project in of pool fencing, we advise you to buy it instead of hire pool fence in Melbourne Our temporary pool fence is specifically designed to prevent children from accessing a pool or spa when filled with water. Our temporary pool fence/fencing is designed according to the Australian Standard A.S. 1926.1-2012 – Swimming Pool Safety. Temporary pool fences are installed around the swimming pools or spas for security purposes. When constructing or renovating a pool, Australian law clarifies that all pools must have temporary fencing during the process. Standard temporary fencing, construction fencing, and crowd control barriers do not comply when putting in a Melbourne pool Fencing. Any contractors ignoring these regulations may be prosecuted and receive substantial fines.
Using the correct Melbourne Temporary pool fencing product means councils will not permit the filing of pools until a permanent fence is built. We advise contacting your local council for further information if your permanent fence suffers a delay in construction.
(1). Pre HD Gal. Pipe welded, and weld spot zinc powder sprayed.
(2). HD Gal. After welded.
Material: High-quality Q235 steel rail and billet steel.
Size | 1250x1980mm, 1300x2311mm, 1100x2230mm, 1100x2100mm, 1100x2000mm |
Frame pipe | Ø38x2mm, Ø38x1.8mm, Ø38x1.5mm, Ø32x2mm, Ø32x1.8mm, Ø32x1.5mm, Ø25x2mm, Ø25x1.8mm, Ø25x1.5mm, Ø25x25mm |
Inside pipe | Ø25x1mm, Ø20x1mm, Ø16x1mm, Ø12x1mm |