358 mesh fencing - the highest level of security welded panel barrier
358 extra high-security mesh fence made from a type of strong welded mesh panel with a small mesh opening. It is extremely difficult to penetrate and difficult to attack using conventional hand tools. Has the features of anti-climbing and anti-cutting. The fence name 358 comes from its panel mesh opening 3" × 0.5" × 8 gauge - approximate to 76.2mm × 12.7mm × 4mm mesh opening.
358 mesh fence has the features of anti-cutting and anti-climbing.
358 mesh fence Features:
· Anti-climbing: more small openings, no toe or finger holds.
· Anti-cut: robust wire and welded joints make cutting very difficult by bolt cutters and wire cutters.
· High strength welded at each intersection.
· Durable: covering Galvan and polymer powder coating ensure long service life.
· Mesh fencing specially configured to provide maximum visibility, especially used for emergency and electronic detection systems.
The panels are made of heavy mesh with a high level of security in width 2515mm and a height of 2007mm to 3302mm. Several panels can be installed on top of each other. This may be achieved a total height of 6300mm.
358 mesh panel size
· Mesh pattern: 76.2mm (3") × 12.7mm (0.5") resistance welded well at each intersection
· Wire diameter: 4mm horizontal wire and vertical Wire.
· Weld strength: range 540-690 N/m2
· Surface treatment: 358 mesh fence panels made from galfan wire, then PVC powder coating (Min. 100 microns), or PVC powder painting. It provides additional protection and increases the potential life span.
· Colors: Green RAL 6005, or Black RAL 9005.
· Installation: Overlapped 75mm minimum at each post (shown as the two following pictures below) for securing with slotted clamp bars and M8 diameter bolts.
Fence posts
· Material: high-grade steel for maximum strength and rigidity.
· Post section: 60×60mm, 80×80mm, 100×100mm or 120×120mm.
· Post Plate thickness: 2.5/3.0/4.0/5.0mm.
· Finish: inside and outside galvanized (Min. 275 g/m2), subsequently covered with a polymer powder (Min. 60 microns).
· Colors: Green RAL 6005, or Black RAL 9005.
· Post cap: metal caps or plastic cap.
· Metal clips and clamps are hot dips galvanised then powder coating in green or black colour.