The visibility of the dog kennel chain link allows animals to see out and not feel too “fenced in,” while the chain-link material holds up well against chewing and clawing. The chain link is strong and can hold even the most persistent pet Chain link makes the perfect fence for keeping dogs and other small animals. . Welcome to your inquiry and visit.
- We mainly manufacture chain link dog cages, square tube dog cages, dog fences, dog running cages etc.
- We have a professional designer who can design the dog cages according to your market.
- Our primary markets are the USA, Canada, UK, Poland, Australia, Malaysia, Indonesia, Philippines, India etc.
Gate Latch
Chain link dog kennel gate latch is specially designed for
dog kennels and other animal cages to minimize the gap between the gate and the frame. A tighter gap results in fewer escapes of your pets from the kennel and keeps them safer than if you are using another regular gate latch. It would help if you lifted the latch for a standard fork latch, and the gate will be open. However, it would help lift the latch straight up before turning for the dog-proof kennel latch. Most dogs fail to flip the latches and escape.
 DKGL-01: Dog kennel gate latch. |  DKGL-02: Kennel gate latch for a single gate. |
Gate Hinges
Chain link dog kennel gate hinges are designed for a tight fit. The tighter the spacing between the frame and the gate, the less chance of escaping for your pets. Unlike standard hinges, including female and male hinges, this kennel hinge eliminates the female hinge by bolting the strap portion to the frame and fitting the male portion into the gate. Another critical difference is that the space between hinge and frame is much shorter than standard hinges, With two kennel hinges per gate at the top and bottom. Kennel hinges are only used for 1-3/8" pipe. 3/8" × 2" carriage bolts are included.
Product description:
- Item: dog kennel hinge.
- Material: pressed steel.
- Pipe: 1-3/8 in.
- Hardware: 3/8" × 2" carriage bolts.
- Finish: hot-dip galvanization.

DKH-02: Welded wire mesh kennel gate hinge.
dog kennel chain link Saddle Clamps
dog kennel chain link saddle clamps or panel clamps are used to secure two panels together. They are widely used in installing a dog kennel and temporary panels. Available for the pipe with 1-3/8, 1-5/8 and 2-inch outside diameter. One set of carriage bolts and nuts is required.
Product description:
- Item: dog kennel panel saddle clamp.
- Material: galvanized press steel.
- Pipe size: 1-3/8, 1-5/8 and 2 in.
- Carriage bolt: 5/16" × 1-1/4".

DKPC-02: Saddle clamps connecting two chain-link panels.
- Item: dog kennel gate latch.
- Material: pressed steel.
- Post side: 1-3/8 in.
- Gate frame: 1-3/8 in.
- Finish: hot-dip galvanization.
Specification of dog kennel chain link
dog kennel chain link specification not listed the following we accept ODM and OEM supplies
material | low carbon steel wire |
Wire diameter | 2-4mm |
hole size(mm) | 50x50mm,60x60mm,70x70mmetc. |
kennel size | 2x2x1.8m,2x2x2m, 2.4x3x2metc. |
frame pipe | O.D.25mm,O.D.32mm,O.D.38mm |