crowd control barrier, also referred to as crowd control barricades, are commonly used at many public events, security for special events, parades, festivals, concerts and sporting events. It is ideal where high quality, attractive and durable crowd control is required. The barrier is built from high-quality carbon steel and is hot-dipped galvanized inside and out to ensure long-term weather resistance.
1. Detailed introduction
2. Specification
Specification | Normal size |
Panel Size | 2.1 x 1.1m,2.2*1.1m,2.5*1.2mm |
Frame | 25mm,32mm,38mm,40mm,42mm & 48mmO.D |
Infill Picket | 12mm,16mm,20mm & 25mm O.D |
Spacing | 60mm,100mm,120mm,150mm,190mm & 200mm |
Finish | Hot-dipped Galvanized or powder coated |
Feet | Detached flat feet/bridge feet or settled "^" type feet |
3 . Surface treatment
Hot dipped galvanized.
Crowd control barrier are fully hot-dipped galvanized after welding. Each barrier is completely dipped in a gal bath after manufacture. This is the best galvanizing process available.This means they will be far more weather resistant and durable, and will last much longer than other crowd barriers on the market.
Above photo shows hot dipped galvanized crowd control barrier with detachable bridge feet.
PVC painted or coated
Above photo shows pvc painted crowd control barrier with fixed feet.
4. Different kinds of base feet
The feet are either flat or arched,removable or fixed.
Crowd control metal barricade with bridge feet, is the best selling crowd control barrier on the market! The bridge-foot design provides maximum stability for the barrier , thus making the product an ideal choice for use on grass, soft or uneven surfaces. The Bridge Foot provides the best resistance to pushing by crowds - so if you are planning a parade, rally or concert, choose this for your sensitive crowd control needs.
Crowd control metal barricade with flat feet, is the ideal choice at special events or venues that require funneling crowds or traffic in parallel lines. The flat-foot design minimizes the tripping hazard and vehicle tires roll easily over the foot without damage to the barricade. The flat foot distributes weight evenly and rubber grommets provide added protection for sensitive floors. Two holes in each foot allows it to be anchored to the ground.
5. Details show
6. Applications
1>There is a layer of bubble wrap at the bottom of pallet, which can protect the last barrier;
2>There is a small piece of carton paper between each two barriers to prevent rubbing against each other;
3>There is also carton paper under the pacing belt;
4>Finally all barriers will be packed by several layers of plastic film.
Specifications of crowd control panel fencing
Model No. | Length | Bottom tube | Small tubes | Finish | Loaded in 1x40HQ |
HML-TB1910 | 2 m | Ø35 x 1.2 mm | Ø16 x 0.8 mm | Hot dip galvanized | 690 PCS |
Barrier size | 1.1x2.1m, 1.1x2.2m, 1.2x2.5m, 1.3x2.3m, etc | ||||
Outer tube | 38mm, 36mm, 32mm, etc | ||||
Inner tube | 25mm, 16mm, 12mm, etc | ||||
Spacing | 100mm, 150mm, 190mm & 200mm | ||||
Application | Secure construction sites, private, major public, events ,etc. | ||||
Feature | √ Strong & excellent stability √ Weather resistance finish - galvanized, powder coating & zinc √ Double interlocking hinge points - excellent stability - quick and easy installation √ Removable feet - can be taken off during stacking and storing. | ||||
√ Fully galvanised for extended life outdoors