Cable Coiling & Wrapping Machine:

Machine Main Feature:

1. Connect with the extrusion line for the non-stop cable coiling and wrapping operation.

2. With Auto labeling machine, saving labor cost,safe and convenience.

3. Can connect with robot stacking system.

4. System with automatic detection function, when problem come out, the machine can auto detect the mistakes, and send message to warn the operator.

5. Operation control Method:Touch screen+PLC；

6. Machine design Line speed:Max300M/min;

7. Microcomputer memory can store 99 different specifications of wire coil. When you need to change the product

specifications, you just need to read the data of the stored specifications. No need to input again, and you can produce immediately.

8. Traverse device: by adopts Mitsubishi servo motor and synchronizes with the main machine of coiling.

9. Whole machine electrical circuit control: Mitsubishi microcomputer programmable controller (PLC).

10. Instrument and switch on the operation panel: touch screen, speed adjustment button.

11. Speed can be adjusted on the touch screen or the speed adjustment button.

12. If the diameter is not up to the requirement, the waste wire can be automatically eliminated or the coiling function can be continued after manual marking.

Film Wrapping Machine Specification:

1. PVC∕PE/PP Film Tape size:Thickness0.05mm～0.07mm × Width 40mm～50mm.

2. Film Loading Method: Pneumatic Clamping.

3. Operation panel adopts man-machine interface﹙Graphic Operator Interface﹚.

4. Whole machine electrical loop control: Adopt Mitsubishi microcomputer programmable controller (P.L.C).

5. Instruments and switches on the operation panel: touch screen, speed adjustment button, emergency switch, etc

6. It can be equipped with an automatic label feeding mechanism (optional), which can automatically absorb a label and feed it onto the coil.

7. Label requirements: airtight, the label width is less than the coil height of 10mm

8. Use holding arm type, driven by AC motor, rotate coil smoothly.

9. Adjust the size of arm, use electro-motion type, rapid and easily. When changing the product specifications, only need to read the memory data, and can produce immediately without adjusting the test.

Technical Parameter: