M2.5 Non - Magnetic Brass Threaded Inserts For Composites DIN8140 Radiator Or Gearbox

Information

Copper screw sleeve is made of phosphor bronze, its electric conductivity has been improved significantly, and it is non-magnetic. It is suitable for products with special requirements on electric conductivity and magnetism.

The thread is a new type of internal thread, which can be fixed on the threaded connection and screwed into the threaded hole of the connected part. The standard internal thread is captured (or formed) and then screwed in. It is also called a threaded sleeve, or wire for short. It is a kind of spring-shaped concentric body at home and abroad with high-strength, shell and ground-bright roller diamond-shaped stainless steel wire cleaning equipment processing technology. It is mainly used for wear-resistant threads and low-strength. The principle is to connect the thread and the base. Connection, manufacturing thread manufacturing performance, improved the threaded holes of low-strength engineering materials such as aluminum glass, magnesium alloy, structure, plastics, etc., and the threaded holes of low-strength engineering materials such as plastics, which can form international standards and serious internal The thread has the functions of high connection strength, earthquake resistance, impact resistance and fatigue resistance. It can disperse heating to protect the thread of the substrate, track the life of the electronic substrate, and is widely used.

Screw thread inserts can be used to strengthen tapping and extend application life. The components are shared across the bolts and holes, thereby increasing or maintaining the pull-out resistance. Free routing thread inserts are usually made of 304 (18-8) stainless steel wire rolled into a diamond-shaped partial surface.

Parameter

Features

1 Wire thread insert used in a variety of low-strength materials, wear resistance can be improved largely screw connection, to avoid damage to the connection thread.

2 Due to the wire thread insert a certain flexibility, allows more uniform load distribution on the thread turns, pitch and thread type to eliminate a deviation between the screw and the screw, and can absorb vibrations, thereby increasing the strength of the screw connection and resistance to Fatigue strength.

3 The locking nut can type wire locking screw in the threaded hole, the screw will not loosen when subjected to shock and vibration buckle, usually better than the performance of the process of the locking device.

4 Compared with the method of inserting steel or copper bushings, under the same strength conditions, screws with smaller size and higher strength can be selected, which can reduce the volume and reduce the weight.

5 The wire thread insert hardness than the screw, and thus screw connection with small wear during the assembly and disassembly, can be used repeatedly. According to experimental study, wire thread insert is more than 7 times the tensile strength of the screw, and therefore will not damage the wire thread insert in screw breakage.

Why Choose Us?

1. A factory with more than 20 years' experience in manufacturing of Thread Inserts.
2. Competitive pricing & military quality.
3. Quick replies to quotations and requests for information.
4. Timely deliveries, rich experience in IMP and EXP.
5. Advanced R & D center, more than one thousand types of threaded inserts and tools.
6. Strict quality control system, passed the SGS and ISO9001: 2015.
7. Quality tools & products, as good as heli-coil, Keensert, Ensat and etc.
8. Comprehensive after-sales support and troubleshooting.
9. Famous brands in China .
10. High quality enterprises in the region.