M3 M6 M8 M10 Furniture Self - Tapping Insert Threaded For Wood Type E

Introduction

Self-tapping threaded sleeve braces also called self-tapping, is a new type of reinforcing the strength of the threaded fasteners, self-tapping threaded sleeve has inner and outer tooth pattern, embedded in plastic, cast iron, aluminum, copper and other soft material, can be formed relatively High-strength internal threaded holes, self-tapping screw sleeves (self-tapping braces) can also repair damaged internal threads.
Self-tapping threaded sleeve mounted without prior tapping, installation tool can be used directly screwed into specific holes in the base material reserved for the female thread teeth have been crushed and the original can be used the same screw, economic appearance, the new articles but also increases its thread strength.
Self-tapping thread inserts (self-tapping braces) is now widely used in the automotive industry, rail car industry, shipbuilding industry, household appliances, construction machinery, business machines, electronic products, engineering plastics, advanced modular furniture, aluminum die-casting and other industries.
Self-tapping screws are generally classified iron teeth, finger F is a wood-type teeth, usually countersunk head, generally refers to a type A A dental tip end banquet i.e., B-type B generally refers teeth, i.e. flat end banquet.

Use

Self-tapping threaded inserts are self-tapping threaded inserts with slots or holes. Slotted threaded threaded inserts are recommended for most applications. On some materials, this threaded sleeve provides the perfect specific thread lock function. If it still does not work, it is generally recommended to use the 307/308 type, which has made a major breakthrough in the difficulty of material cutting. This product not only has a very thick wall, but also has three circular holes with cutting ability scattered on the wall. The 307/308 product is especially suitable for the case where the material thickness is not too wide.

302 type is the most widely used in all self tapping screw sleeve products. Its two slots not only play the role of cutting, but also have a little inward locking force.

Model 303 is a thin-walled version of 302 series, which is mainly used in some plastic or light alloy that cannot have thick wall.

For difficult to cut materials, it has larger wall thickness, shallower but sharper external thread. The screw sleeve uses three round holes as cutting edge. The difference between 307 and 308 is the length of the insert.

FAQ

Q: What’s your business scope?

A: OEM Service.

Q.How to contact us ?

A: You can send inquiry of our products,it will be replied within 6 hours;And you can contact dirrectly with us through TM or WhatsApp as you like.

Q. What information should I give to you for inquiry?

A: If you have drawings or samples,pls feel free to send us,and tell us your special requirements such as material, tolerance, surface treatments and the amount you need,ect .

Q. What about the delivery day?

A: The delivery date is about 10-15 days after receipt of payment. Except for custom products.

Q. What about the payment terms?

A: Generally EXW and we can also consult accroding to your requirement.