YM-350Wood Crushe It can be used for cutting bamboo, thatch, corn stalk, sorghum stalk and other fibrous culm materials

Sawdust machine is a new type of wood powder production before the production of ideal mechanical equipment, it can be wood, forks and other raw materials into sawdust, with less investment, low energy consumption, high productivity, good economic benefits, easy to use and maintenance and other advantages.The sawdust machine is especially suitable for the sawdust processing in edible fungus culture medium. It is mainly composed of chip cutting device, crushing device and fan.The wood chips cut by the chip cutting device have small particle size, and can be sent to the crushing device for further crushing without drying. The crushed wood products are sent to the aggregate site by the fan.The whole set of equipment is driven by only one motor, with simple structure, compact layout, cheap price, stable work, less energy consumption, high output, good quality of sawdust finished products, low processing cost.It can also be used for bamboo, thatch, corn stalk, sorghum stalk and other fibrous culm-like materials.The sawdust machine can also be used for raw material production of particleboard and sawdust board with high density.

Advantages of wood pulverizer:

1. Low energy consumption, high output, equipped with brand electrical appliances, ensure the production of equipment without worry.

2. Mature technology solves the defect that large logs cannot be crushed.

3. Stable performance, with output ranging from 3-10 tons of sawdust;(Different models and different outputs)

4. The whole set of equipment remove the knife without wearing parts, simple maintenance, easy to operate!

5. Before the machine leaves the factory, the installation and debugging are completed, and the customer can connect to the electricity for production and rest assured for use.

wood chips machine principle:

The use of hydraulic clamping material forced feeding, bearing with tool high-speed rotation, the material extrusion bite to crush, an hour to reach the production 3-10 tons, 2-0.5 mm sawdust production equipment, equipment Asian American company Germany imported original equipment research and development, so the performance is very stable, specifically for logs, wood scrap, branches, slab, a molding, No secondary crushing is required,

Technical Data:

Installation and maintenance

The maintenance of the machine is a very important regular work, it should be in close cooperation with the extremely operation and overhaul, due to full-time personnel on duty inspection.

Machine maintenance

1, bearing

The bearing of the crusher bears all the load of the machine, so good lubrication has a great relationship to the bearing life, it directly affects the machine

Of the service life and rate of operation, thus requiring that the lubricating oil injected must be clean and sealed well,

Main oiling area of this machine

(1) Rotary bearing (2) roll bearing (3) All gears (4) movable bearing, sliding plane.

2, the newly installed tire is prone to loose must be frequently checked.

3. Pay attention to the normal operation of all parts of the machine.

4, put the bottom plane of the mobile device, should be out of dust and other materials to avoid the machine can not be broken materials can not be moved on the bottom bearing, so that serious accidents occur.

5, bearing oil temperature rise, should stop immediately to check the reason to eliminate.