Wood Sawdust Block Cutting Machine Wood Pallet Block Cutter

Introduction:
The wood sawdust block cutting machine is mainly used for plywood foot pier, wood shavings foot pier, wood sawdust pallet foot pier, also can cut real wood borad into small pieces, it can adjust the block size as you need. It is the one important machine for the wooden sawdust block making line.

Specifications:

Machine Dimensions: 1800*1300*1500mm

Cutting diameter: 100*100/100*200mm

Brake mode: pneumatic

Cutting precision: smooth

Setting power: 7.5kw

Working voltage: 380v 50Hz (local voltage and current can be selected according to the area of use)

Cutting speed: 1800-2000pcs/hour

Features:

1. The machine is easy to operate, one worker operation;

2. The production efficiency is around 2000 pcs per hour;

3. The cross-section is completely vertical, reducing the previous cutting loss;

4. Input the numerical value to set the cutting length, without manual adjustment, suitable for all specifications of the foot pier;

5. Save the production cost, improve the working efficiency, enhance the enterprise automation process.

Production line:

Crusher or Wood shaving machine(it is used for the raw material with much large size)
Please use wood shavings and sawdust to make pallets. If the raw material is not very big, it is unnecessary to crush.

Dryer machine
Drying the raw material to keep the 10%-15% moisture.

Gluing machine
Mixing the material together tighter for next step.

Hot press machine (main machine of the wood sawdust block production line)
Three types of the hot press machine for your choice.

Wood sawdust Pallet cutter
Cutting the long wood block to small cubics.

FAQ:
Q1. What's the raw material for the wood sawdust block making machine?
A1: Wood Sawdust, wood shavings, wood chips, waste wood, used pallet and so on, also the glue(Urea formaldehyde resin&UF resin).

Q2. What is the size of the raw material and moisture?
A2: The size of the raw material is required to be less than 1 cm thin like paper sheet, and the moisture requirement is 10-15%.

Q3. Can i get some discount if i buy this machine from your company?
A3: Yes. We will give you the most favourable price; if buy more than two sets, the big discount will be given.

Q4. What is your payment term?
A4: 50% TT payment in advance, balance payment should be paid before shipment.

Q5. How long is your delivery time?
A5: Within 10 working days after getting the down payment.

Q6. Do you provide oversea service?
A6: If in need, we can dispatch our technician to do the installation and train your workers, but all the fees are on your side.

Q7. What is the warranty?
A7: The main machine warranty is 15 months.