Flat Cut/ Crown Cut American Walnut Wood Veneer, Natural American Walnut Veneer

• Veneer Cut: Crown Cut

• Grade: A

• Length: Panel≥250cm, Door:210-245cm, Furniture≥120cm

• Width ≥12 cm

• Thickness: 0.45MM (other thickness could be customized)

• Thickness Tolerance: +/-0.02MM

• Moisture Content: 8-12%

• Usage: Furniture, Fancy Plywood/MDF; Flooring,Door, Cabinet, Chest

TECHNIES SHEET:

ABOUT AMERICAN WALNUT:

Walnut sapwood is white, but is not too wide, so does not appear on too many pieces of lumber when large logs are being sawn. Unfortunately, today's log size is decreasing at the sawmill, so sapwood is becoming more prevalent on more pieces of lumber. Most uses do not like the white sapwood, but want the rich, chocolate colored heartwood. To make the wood more uniform in color and to darken the sapwood, oftentimes the wood is steamed for several days before drying. This steaming also eliminates the greenish hue sometimes encountered within the brown heartwood. (Not all steaming is done correctly; steaming must be done on freshly sawn lumber at temperatures of about 200 to 210 degrees F with 100 percent relative humidity for several days. Be careful when purchasing walnut that the contract includes some recourse if the sapwood color is not acceptable. Make sure to check the core and the surface for correct color. Also, file any color complaints ASAP after receipt of the lumber. Note that the color will not darken much after steaming; what you see is what you have.) If walnut is not steamed, the sapwood is usually custom stained in finishing to develop uniform color. Such "stained" wood may not be suitable in all cases. As the walnut color darkens slowly over the years, this stained sapwood area does not darken as much. This means some color contrasts may develop after several years or longer that can be undesirable.

ABOUT US:

Lonson Veneer Co.,Ltd was established in the year 2012, with more than 9 years in the wood veneers producing, exporting, our wood veneer already widely acceptable by the clients from more than 20 countries, like South Korea, UAE, India, Pakistan, Vietnam, Indonesia, Malaysia, Bangladesh, etc.

Our wood veneers species cover widely, species like white oak, red oak, white ash, American black walnut, cherry, maple, hickory, Burmese teak, ebony, pine, birch, basswood, apple wood, eucalyptus......are all available. Sizes also varies from wood flooring size to furniture size, door size, panel size. Different grades could be obtained accordingly.

WHY US:

1, Experienced wood veneers manufacturer and exporter for 9+ years.

2, Various kinds wood veneers, including Natural wood veneer, Dying veneer, Fumed veneer, Rough Cut veneer, Recomposed veneer, etc.

3, Different sizes and grades are all available. Wood Flooring veneer, Furniture size, door size, panel size, thickness from 0.4-2mm.

4, Professional and Considerate Service.

5, Fast Delivery and Continuous Supply.

EXPORT PACKAGE:

FACTORY TOUR: