Product Description:

Features:

• Product Name: Self Adhesive PVC Film
• Design: Wood Grain, Marble, Brick, Stone, Plain Color Etc.
• Adhesive: Acrylic Pressure Sensitive Adhesive
• Size: 122cm*50m, 60cm*10m
• Material: PVC
• Thickness: 0.08mm-0.15mm
• Contact Paper Rolls
• Contact Paper
• Self Adhesive Vinyl Rolls

Technical Parameters:

Applications:

Self-adhesive PVC film is a versatile material that can be used for various applications, including home improvement, crafts, signage, and more. Here's a general guide on how to apply self-adhesive PVC film:

Materials you'll need:

• Self-adhesive PVC film
• A clean, smooth surface to apply the film to (e.g., furniture, walls, windows, or any other suitable surface)
• A measuring tape or ruler
• A sharp utility knife or scissors
• A squeegee or a credit card
• A clean cloth or sponge
• A spray bottle with soapy water (optional)

Steps for application:

• Prepare the surface: Ensure that the surface you plan to cover with self-adhesive PVC film is clean, dry, and smooth. Remove any dust, dirt, or imperfections. If the surface is dirty, clean it thoroughly and let it dry completely.
• Measure and cut: Measure the dimensions of the surface you want to cover and add a few extra inches to each side to allow for trimming. Cut the self-adhesive PVC film to the desired size using a sharp utility knife or scissors. Be precise in your measurements and cutting to ensure a proper fit.
• Peel off the backing: Carefully peel back a few inches of the backing paper from one end of the PVC film. Avoid touching the adhesive side to prevent fingerprints and dirt from sticking to it.
• Apply the film: Begin applying the exposed adhesive side of the PVC film to the surface. Start at one corner or edge and align it with the surface. As you apply the film, gradually peel off more of the backing paper, smoothing the film onto the surface as you go. You can use a squeegee or a credit card to help remove any air bubbles and ensure a smooth, even application.
• Smooth out bubbles: If you notice any air bubbles trapped under the film, use the squeegee or credit card to gently push them out towards the edges. Work from the center outward to expel the bubbles completely.
• Trim excess: Once the film is applied smoothly, use a utility knife or scissors to trim any excess film along the edges. Be cautious when cutting to avoid damaging the surface underneath.
• Finish and clean: After trimming, go over the entire surface with a clean cloth or sponge to ensure that the PVC film is securely adhered and free from any air bubbles or wrinkles. If you used soapy water during application, wipe away any excess water or soap residue.
• Final inspection: Inspect the surface to ensure that the PVC film is securely in place and free from imperfections. If you encounter any issues, gently lift the film and reapply as needed.

Self-adhesive PVC film can be used for a wide range of purposes, so make sure to follow the specific instructions provided by the manufacturer if you have a unique application in mind. Proper surface preparation and careful installation are key to achieving a professional-looking result.

Customization:

Packing and Shipping:

For the packaging and shipping of Self Adhesive PVC Film, the following should be taken into consideration:

• The film should be properly packaged and sealed to ensure that no dirt or moisture is trapped in.
• The film should be stored in a dry and cool area, away from heat and direct sunlight.
• The film should be shipped in a box or envelope and must be properly labeled.
• The film should be shipped with appropriate padding and cushioning to prevent it from being damaged during transit.