Working Principle of Ring Die Feed Pellet Mill(animal feed pellet mill)
The feed ingredients run through feeder into conditioner and are mixed in the conditioner with hot steam, then they go into the pelletizing chamber through blanking taper slot. By scraper the powder material enters into the pelletizing zone. And then the material will be pressed by ring die and rollers into pellets. The pellets are discharged from the die hole and cut into the requested size by the cutter.

Features of Pellet Making Machine Price: Pellet Feed Making Machine

* ring die feed pellet making machine reaches international advanced level; it has the latest technology and low breakdown

rate;
* On the basis of Type A pellet mill, variable speed motor is added to raw material conveying to control the feeding, the

feeding is steady and reliable;
* Drive mechanism adopts high strength belt, with steady running and low noise;
* Drive mechanism adopts high quality bearing to ensure high speed and stable operation;
* Feeding part is equipped with a permanent magnet to remove metallic impurities; this prolongs the service life of main

parts and meanwhile reduce the use of auxiliary equipment.
* Convenient operation, reliable sealing, high production rate, low power consumption, low labor strength.

What Materials can be Pelletized by Ring Die Wood Pellet Machine?
Nearly all forestry and agro-waste material can be made into wood pellets by our ring die wood pellet machine, such as: Wood Chips, Shaving, Sawdust, Groundnut-shell, Sugarcane Biogases, Caster Shells/Stalk, Coffee Husk, Paddy Straw, Sunflower Stalk, Cotton Stalks, Tobacco Waste, Mustard Stalk, Jute Waste, Bamboo Dust, Tea Waste, Wheat Straw, Palm husk, Soybeans Husk, Coir Pitch Barks/Straws, Rice Husks etc. The final pellets can be used for industrial boilers and large power plants as well as home heating.

Why Choose Poultry Feed Pelletizer for your CHICKEN?
This poultry feed pelletizer for small poultry farm or home use is different from other feed pellet mills. As for chicken, they are kept for fast and health growth. The feed of chicken should emphasize the nutrition content and ingredients. We developed this homemade chicken feed pelletizer and focused to increase the integrity of nutrition and palatability which can accelerate chicken to have more than usual. What’s more, chicken in different growing stages need different size feed pellets, with this machine, you can make feed pellets from 2-10 mm, meeting different needs.

Matters need attention

1. The new machine for the first time must be run or otherwise can't be used normally.
2. When the pellet machine is working, don't reach into the input hopper by hand. If necessary, you can use a stick to help.
3. Before the machine is turned on, you need to add a little mixture before starting. When the machine is shut down, please leave a little mixture in the machine to prevent the roller and the template idling.
4. When the machine is working, and the phenomenon of stuck happens, should immediately stop and make the roller pressed to the bolt loose, and then restart the machine.
5. Each time the work is completed, the bolt of adjusting roller must be released.
6. If the machine is used for a certain period of time or squeeze out a certain amount of pellets and the pellets are made into pieces or the pellets are broken, the template should be turned to the bottom, and 2%-4% water should be added to the mixture.
7. Please often check the belt tightness to prevent the emergence of low yield, belt slippery and so on.
8. Before starting, firstly add gear oil to the gearbox reaching to 2/3 of the horizontal axis. Pellet machine in the first use should work in low load for 40 hours or so, and then replace the gearbox gear oil, 100 hours after the regular replacement. All bearings should be regularly filled with grease.
9. Particle machine works continuously and then the motor fever reaches to 70 degrees Celsius, it is a normal phenomenon.