Heavy Duty High Speed Woodworking CNC Machines Panel Beam Saw Machine

Woodworking CNC Machines Panel Beam Saw Machine

Features

1. The pneumatic floating ball table is convenient for feeding, and the special connecting and guiding device ensures the smooth operation of the feeding device, reduces the wear of the contact surface and prevents the board surface from scratching;
2. The high-precision servo motor drives accurately forward, the planetary reducer, the grinding-level rack and pinion drive, the feeding device moves forward and backward freely, and the positioning error is as low as ±0.02mm;
3. The base of the saw machine moves forward and smoothly, and the guide rail is installed in a "U" shape close to the body, which automatically removes dust, does not oil, and does not stick to the machine. The base of the saw machine moves forward and backward automatically for fast cutting. The cutting effect is good, solid and durable, and the sawing error is as low as ±0.10mm;
4. The rotating speed of the cutting saw blade is controlled by frequency conversion, and the cutting speed and the rotating speed of the saw blade can be adjusted in time for PS board, acrylic board, MDF and other boards of different materials, which ensures the smoothness of the cutting edge, and does not collapse or melt the edge;
5. The control panel is equipped with an emergency stop device, the feeding adopts a manual pull-wire parking device, and the discharge port is equipped with a photoelectric induction device to ensure the safety of personnel, infrared scanning, and the saw blade will automatically sink if there are foreign objects within 10cm of the saw blade to prevent accidents;
6. The key-type dust-proof curtain can make the machine work more environmentally friendly. The main part is equipped with multiple dust-absorbing ports, which has a good dust-absorbing effect.

Precautions for operating wood panel sawing machine:

1. Before starting the machine, check whether the saw blade is sharp, whether the clamp handle of the saw blade base and the screws of each component are loose, and adjust it in time;
2. Before starting the machine, clean up the sawdust on the machine table, air trough, etc. in time, and check whether there is any remaining sawdust at the interface of the control box, etc., and clean it up immediately;
3. Workers wear work clothes, work gloves and protective glasses when working;
4. During the feeding process, the board must be close to the machine ruler and pushed into the manipulator;
5. Do not stand in the cutting direction to prevent sawdust from flying out and hurting people. When discharging, workers should ensure a safe distance from the discharge port;
6. When a fault occurs, the power supply should be cut off immediately and the operation should be stopped, and repaired and maintained by professionals;
7. Cut off the power supply in time after the stop work, and clean and lubricate the equipment.