CNC Panel Saw Machine For solid wood board bakelite board multi-layer board

Precautions for operating wood panel sawing machine:

1. Before starting the machine, check whether the saw blade is sharp, whether the clamp handle of the saw blade base and the screws of each component are loose, and adjust it in time;
2. Before starting the machine, clean up the sawdust on the machine table, air trough, etc. in time, and check whether there is any remaining sawdust at the interface of the control box, etc., and clean it up immediately;
3. Workers wear work clothes, work gloves and protective glasses when working;
4. During the feeding process, the board must be close to the machine ruler and pushed into the manipulator;
5. Do not stand in the cutting direction to prevent sawdust from flying out and hurting people. When discharging, workers should ensure a safe distance from the discharge port;
6. When a fault occurs, the power supply should be cut off immediately and the operation should be stopped, and repaired and maintained by professionals;
7. Cut off the power supply in time after the stop work, and clean and lubricate the equipment.

1. When cutting the material, you only need to input the size (such as length, width and quantity) required for cutting on the touch screen of the machine. After inputting the target size, put the plate into the machine to start the machine for automatic cutting, and its automatic positioning and cutting. Size, automatic sawing, no need for manual intervention, just wait for the material to be discharged, low labor intensity, high efficiency, and can be operated by raw hands;
2. The body of the whole machine is made of high-quality steel reinforced and welded. After high-temperature annealing treatment of large heat treatment equipment, the stress of the body is effectively removed, and it can withstand high-strength work for a long time without deformation. The machine support table steel plate is 25MM thick, and the body square tube is 10MM thick, which is solid and stable, ensuring that the machine runs smoothly during cutting, and is not easy to oscillate, ensuring cutting accuracy and cutting effect;
3. The base of the saw machine is subjected to dynamic balance treatment and rotation test. The saw machine is driven by a high-precision servo motor when cutting, and runs smoothly on a linear precision guide rail. The motor has high power and sufficient horsepower. The saw blade and the saw machine base are driven by synchronous belts. , cutting forcefully. The cutting speed of the saw blade can be adjusted at any time according to the cutting thickness of the plate to ensure the cutting effect;
4. The saw blade automatically reciprocates back and forth when cutting, and the German Rexroth precision linear guide ensures the verticality of the saw blade, no edge chipping, continuous layering, excellent cutting straightness, and smooth and flat end surface;
5. The positioning dimension of the feeding part is driven by a high-precision servo motor. The original imported CST planetary reducer and Taiwan Kaihe KH grinding grade gear rack ensure the feeding dimensional accuracy, and the cutting error is as low as ±0.10MM;