15000BPH Automatic Bottle Ginger Ale Carbonated Drink Filling Machine Stainless Steel 304 316

Ginger ale approach:

1. Boil the ginger syrup first

2. Peel and slice the ginger, and boil it with the same volume of water

3. Boil on low heat for five minutes, then turn off the heat and let it stand for one hour

4. Filter out the ginger water with filter, add the same volume of sugar (1cup) as the original water, and boil until the sugar dissolves

5. Put it into a small pot and take it as you like

6. Add ginger syrup, crushed mint leaves, lime juice (or lemon juice), bubble water and ice to drink

It mainly used for producing Carbonated beverage; since carbon dioxide gases(CO2) are pressurized to mix with liquids , the pressure throughout the filling system is typically 0.3 Mpa-0.6Mpa. and because CO2 is more stable at low temperatures, low temperatures increase the solubility of CO2 in water. To increase the amount of carbon dioxide dissolved in water, the beverage is usually mixed and filled at 0-5℃;and there are many other factors affecting CO2 content in carbonated beverages.

Main Parameters:

(1).To use the clamp to hang the bottle neck; to maintain the bottle shape and speed.
(2) .The parts in contact with the material are made of high quality stainless steel, no dead angles, easy to clean;
(3) .Using high-speed filling valve, the liquid level is accurating and there is no liquid leaking, to ensure correct filling;
(4) .The capping adopts advanced technology, the capping and sorting machine is installed at a lower position, and the cap is in a horizontal position to ensure the quality of the cap without damaging the caps;
(5 ).Equipped with a complete protection device to effectively protect the safety of equipment and operators;

(6) .The control system has the functions of production speed control, insufficient cover detection, self-stop of card bottle and production count;

The bottle rinsing is an alternative to the traditional cast iron material sprocket washer. It not only has a long flushing time,
but also greatly increases the production capacity.

The filling part adopts advanced micro-negative pressure gravity filling principle, which is fast, stable and accurate. Make sure the liquid level is accurate and free of liquid damage.

The capping part adopts the magnetic torque type capping head, and the capping head made of copper material can realize the function of grasping and screwing the cap quickly and accurately.

The host adopts advanced PLC automatic control technology, and the main electrical components and pneumatic components are world famous brand products.