10 mesh Wire Diameter 0.4-0.9mm plain SS mesh
Stainless steel woven wire mesh is especially versatile because it is extremely corrosion and chemical resistant even in harsh environment. With countless combinations of mesh opening sizes and diameter wires, stainless steel screen wire mesh provides you with a variety of choices for industrial, architectural, food processing and some non-industrial applications.
Standard:
GB/T 5330.1-2000, GB/T 19628.2-2005
Material:
200 series : 201 202 205
300 series : 301 302 304 304L 309 309S 310 310S 316 316L 321
400 series : 410 420 430
Description:
10 mesh plain weave stainless steel wire mesh including 10 wires and openings of 1 inch Using 0.4-0.9mm diameter wire, by plain weaving, woven 10 mesh opening for 1.6-2.1mm solid particles , it can also be used as a liquid, gas coarse filter support material or protective fabrics to use. This wire diameter and mesh with ratio reasonable, therefore weave structure is very strong. After 13 whole weaving process, so that the mesh surface flatness better
Technical parameter:
Roll width: 1.0-8.0m
Roll length: 15.24m, 30m, 30.5m, 61m
Application:
Hydraulic Filters
Plastic Extrusion
Guarding
Car Grille
Scuttle Panel
Heater Guard
Safety Guard
Ozone Generator
Decorative/Cosmetic Mesh
Food Use
Door And Window Protection
Air Vents
Filters
Sand Sieve
Paper Pulp Transportation
Speakers Cover
Microphones Cover
Protecting Air Intakes From Small Objects And Light Debris
10 mesh plain weave stainless steel screen wire mesh packing:
Stainless steel wire mesh is packed in rolls,winding on a paper tube,wrapped in moisture-proof paper
or plastic film, outside wooden cases or wooden pallet.
Specification list of Stainless Steel Screen Wire Mesh / Woven Wire Cloth
PLAIN AND TWILLED WEAVE | |||||
Mesh | Wire Diameter | Opening Width | Opening Area% | ||
inches | mm | inches | mm | ||
1mesh | 0.135 | 3.5 | 0.865 | 21.97 | 74.8 |
2mesh | 0.12 | 3 | 0.38 | 9.65 | 57.8 |
3mesh | 0.08 | 2 | 0.253 | 6.42 | 57.6 |
4mesh | 0.12 | 3 | 0.13 | 3.3 | 27 |
5mesh | 0.08 | 2 | 0.12 | 3.04 | 36 |
6mesh | 0.063 | 1.6 | 0.104 | 2.64 | 38.9 |
8mesh | 0.063 | 1.6 | 0.062 | 1.57 | 24.6 |
10mesh | 0.047 | 1.2 | 0.053 | 1.34 | 28.1 |
12mesh | 0.041 | 1 | 0.042 | 1.06 | 25.4 |
14mesh | 0.032 | 0.8 | 0.039 | 1.52 | 29.8 |
16mesh | 0.032 | 0.8 | 0.031 | 0.78 | 23.8 |
18mesh | 0.02 | 0.5 | 0.036 | 0.91 | 41.1 |
20mesh | 0.023 | 0.58 | 0.027 | 0.68 | 29.2 |
24mesh | 0.014 | 0.35 | 0.028 | 0.71 | 44.2 |
28mesh | 0.01 | 0.25 | 0.026 | 0.66 | 51.8 |
30mesh | 0.013 | 0.33 | 0.02 | 0.5 | 37.1 |
35mesh | 0.012 | 0.3 | 0.017′ | 0.43 | 33.8 |
40mesh | 0.014 | 0.35 | 0.011 | 0.28 | 19.3 |
50mesh | 0.009 | 0.23 | 0.011 | 0.28 | 30.3 |
60mesh | 0.0075 | 0.19 | 0.009 | 0.22 | 30.5 |
70mesh | 0.0065 | 0.17 | 0.008 | 0.2 | 29.8 |
80mesh | 0.007 | 0.18 | 0.006 | 0.15 | 19.4 |
90mesh | 0.0055 | 0.14 | 0.006 | 0.15 | 25.4 |
100mesh | 0.0045 | 0.11 | 0.006 | 0.15 | 30.3 |
120mesh | 0.004 | 0.1 | 0.0043 | 0.11 | 26.6 |
130mesh | 0.0034 | 0.0086 | 0.0043 | 0.11 | 31.2 |
150mesh | 0.0026 | 0.066 | 0.0041 | 0.1 | 37.4 |
165mesh | 0.0019 | 0.048 | 0.0041 | 0.1 | 44 |
180mesh | 0.0023 | 0.058 | 0.0032 | 0.08 | 33.5 |
200mesh | 0.002 | 0.05 | 0.003 | 0.076 | 36 |
220mesh | 0.0019 | 0.048 | 0.0026 | 0.066 | 33 |
230mesh | 0.0014 | 0.035 | 0.0028 | 0.071 | 46 |
250mesh | 0.0016 | 0.04 | 0.0024 | 0.061 | 36 |
270mesh | 0.0014 | 0.04 | 0.0022 | 0.055 | 38 |
300mesh | 0.0012 | 0.03 | 0.0021 | 0.053 | 40.1 |
325mesh | 0.0014 | 0.04 | 0.0017 | 0.043 | 30 |
400mesh | 0.001 | 0.025 | 0.0015 | 0.038 | 36 |
500mesh | 0.001 | 0.025 | 0.0011 | 0.028 | 25 |
635mesh | 0.0009 | 0.022 | 0.0006 | 0.015 | 14.5 |