Top Quality Brass Woven Wire Mesh Screen For Fine Filtration and Sieving with High Density

As an experienced professional manufacturer, King De Long Wire Mesh Company has so many woven wire mesh for hot sale, and brass woven wire mesh is one of them. Generally, there are also four weaving types for this mesh, plain weave, twilled weave, plain dutch weave, and twilled dutch weave.

As an alloy comprised of copper and zinc, the most commonly used types are 65Cu, 70Cu, and 80Cu, which have a chemical composition of approximately 65% copper and 35% zinc, or 70% copper, 30% zinc, or 80% copper and 20% zinc.

Specifications of brass woven wire mesh
Roll Length: 10 - 50m or customized.
Roll Width: 20mm - 2000mm.
Mesh Count: 1mesh - 200mesh
Weaving Type: Plain Weave, Twilled weave, or Dutch Weave
Packing: Wrapped with waterproof paper and shrink film in the wooden case.

Applications of brass woven wire mesh
Brass woven wire mesh is very widely used in liquid filtration, particle separation, air silencing, and decorative applications.
It is suitable for some other applications, such as papermaking processes, chemicals, oil strainers, plumbing screens, etc.

Brass Woven Wire Mesh Features
Bright and Beautiful Appearance with a Unique Effect
Durable and Spark Resistance
Light Weight but High Density
Recyclable and Long Service Life

Because the brass wire mesh is very easy to be oxidized in the air, to keep the mesh clean and bright, we build a special weaving workshop to produce the brass wire mesh.

Here are some very commonly used Brass Woven Wire Mesh specifications, just for your reference. Other specifications, sizes, and woven types are made to order. Please contact our sales team to discuss this.

Attention
Be careful of the cutting sharp edge, and avoid getting hurt while open and use.
Before you order your mesh, please first check out our stock list, where we put our over-run bargain rolls at lower prices.

King De Long is a Very Good and Reliable Manufacturer of Woven Wire Mesh

King De Long Wire Mesh just started from a small workshop in 1986, after so many years of development, it is now over 266,400 m2. There are more than 400 sets of working machines, including wire-drawing, annealing, weaving, welding, cutting, punching, slitting machines, and so on.

There are special types of equipment to check raw wires, including chemical composition, tensile strength, yield strength, etc.

And our experienced worker team, who have worked in the wire mesh field for 10 years at least, 24 hours and 3 working shifts, could ensure we finish your order in time with good quality.

There is a department in our factory to handle the Stamping, Shearing, Welding, Punching, etc, to produce small discs, filters, strainers, baskets, cylinders, and screens to your exact specifications. Should you have a particular specification in mind, please contact us to discuss your requirements.

For your reference, some photos of our products and factory are listed here, please check.