KDL produce kinds of knitted wire mesh demister ,included stainless steel knitted wire mesh demister,copper knitted wire mesh demister.also we have this Glass fiber knitted wire mesh demister.
product type:
Standard type (SP). High efficiency type (DP) High penetration type (HP)

Specifications:
Diameter: 300-6400mm

Thickness: 100-500mm

Nominal diameter: 500-9000mm

Knitted Wire Mesh Demister Type: Top-mounted (S). Bottom-mounted (X)

Remarks: Drawings are provided for special specifications, and customized production is available.

Wire Mesh Demister Structure:

1. Screen

2 .Distance rods

3 .Grilles

4. Supports

Storage and maintenance Storage: Wire mesh demisters should be stored in a dry, ventilated place without corrosive gases, and open storage is prohibited.

maintain:

1. The wire mesh demister should be checked and cleaned regularly to ensure the demister efficiency and avoid pressure drop increase.

2 After the wire mesh demister is taken out of the container, it should be cleaned and dried in time to avoid corrosion.

Working principle:

The wire mesh demister is a typical product in the inertial collision demister, which has the characteristics of high efficiency, simple structure and small resistance.

Application: The wire mesh demister (demister) is used to separate the liquid droplets entrained by the gas in the tower to ensure the mass transfer efficiency, reduce the loss of valuable materials and improve the operation of the compressor after the tower, generally at the top of the tower Set up the wire mesh demister. It can effectively remove 3--5um mist droplets. If a demister is installed between the trays, it can not only ensure the mass transfer efficiency of the trays, but also reduce the spacing between the trays. Therefore, the wire mesh demister is mainly used for gas-liquid separation.

Product Features:

Waterproof, low temperature resistance, high temperature resistance, anti-static, acid and alkali resistance, etc.

Application:

Process the demister, which is used to separate the liquid droplets in the gas, and can also be extruded to manufacture filter equipment, etc.

Types we can produce:

KDL Packing: