Welded Wire Mesh Panels for Floor Heating in Interior Decoration

Product description:

The floor heating mesh, also known as geothermal mesh, special mesh for floor heating, and steel mesh, is made of black iron wire or modified wire drawn. The diameter of the floor heating mesh wire is mostly 1.5mm to 4mm. The thickness of the wire diameter determines the quality of the project and the bearing capacity of the ground (according to the specific needs of the project). The mesh size has 50mm*50mm, 100mm*100mm, 50mm*100mm, 60mm*60mm, etc. Black wire mesh and low carbon steel wire are generally used for insulation of floor heating engineering. The price of black wire mesh is slightly cheaper than that of low carbon wire mesh.

The commonly used floor heating mesh is 2mm in wire diameter and 100mm × 100mm in mesh size, length and width 1m × 2m. It has the characteristics of flat mesh surface, solid solder joint, uniform mesh and convenient transportation. Its function is to enhance the overall strength of the thermal insulation plate and facilitate the installation and fixation of the heating pipe.

Products advantage:

• Fix the pipe: lay the steel mesh on the surface of the thermal insulation layer and fix the pipe with nylon ties. The characteristics are that the construction speed is relatively fast, the positioning is accurate, and the overall effect of pipe installation is good.
• Enhance the local bearing capacity of the ground: in the processing workshop, garage and other rooms with large ground load, the wire mesh used for floor heating can improve the overall strength of the ground structure layer and avoid the ground cracking, collapse, etc.
• Speed up heat dissipation: because iron has strong thermal conductivity, the ground heat dissipation is very uniform.
• Prevent the ground from cracking: the wire mesh must be placed on the pipe in the middle of the concrete. The reasons for the crack of the floor tiles are: first, the wire mesh is not used; second, the concrete pouring on the ground is too thin, and the concrete pouring should be more than 4 to 5cm.

Specifications: