Stainless Steel Wire Mesh Screens with Different Size Used for Various Filters and Strainers

We can produce filters and related strainers, incorporating our woven wire mesh as the filter medium, to your own specifications. Generally speaking, these parts are mostly of welded or soldered construction. With so many years of experience and practice in manufacturing woven wire mesh and wire mesh filters, now, we could offer various extruders and screen changer options.

Our screens can be in the form of:

Plain or Single Discs and Washers
Multiple Screen Packs with Spot-welding Construction
Bounded with Aluminium or Copper Rims
Multilayer Tubes or Profiled Screens
Filter Baskets with or without Tops

Our stainless steel woven wire mesh screens are produced on high-speed automatic weaving looms and they are all supplied in a neat and convenient package for you. These wire mesh screens are suitable for most types of filtering applications in various industries, including screening plants, even vibratory, etc. Normally, these types of screens are usually fitted with steel hook strips, eyelets, or other special edgings to enable them to be tensioned or bonded to a frame, we’ll also recover any screen from our extensive range of meshes, quickly and efficiently.

Fabrication

To finish these half-made filter parts or filter products, there is a department in our factory to handle the Cutting, Bending, Forming, Shearing, Welding, Punching, etc, to produce small discs, filters, strainers, baskets, cylinders, and screens to your exact specifications. Should you have a particular specification in mind, please contact us to discuss your requirements.

Here are some very commonly used Stainless Steel Woven Wire Mesh specifications, just for your reference. Other specifications, sizes, and woven types are made to order. Please contact our sales team to discuss this.

Attention
Be careful of the cutting sharp edge, and avoid getting hurt while open and use.
Before you order your mesh, please first check out our stock list, where we put our over-run bargain rolls at lower prices.

King De Long Company is a Very Good Manufacturer of Woven Wire Mesh

King De Long Wire Mesh just started from a small workshop in 1986, after so many years of development, it is now over 266,400 m2. There are more than 400 sets of working machines, including wire-drawing, annealing, weaving, welding, cutting, punching, slitting machines, and so on.

There are special types of equipment to check raw wires, including chemical composition, tensile strength, yield strength, etc. And our experienced worker team, who have worked in the wire mesh field for 10 years at least, with 24 hours 3 working shifts, could ensure we finish your order in time with good quality.

There is a department in our factory to handle the Stamping, Shearing, Welding, Punching, etc, to produce small discs, filters, strainers, baskets, cylinders, and screens to your exact specifications. Should you have a particular specification in mind, please contact us to discuss your requirements.

For your reference, some photos of our products and factory are listed here, please check.