Most of us know that in important places like prisons, military meeting and museums, actions have always been taken to prevent the message from being given out. What kind of device can install in these places to reach the purpose, the Rackmount High Power Cell Phone Signal Jammer must be the one which is most suitable.
A big merit of this rockmount high power cell phone signal jammer is that each band can adjust RF power output level or turn off without influencing the other bands' operation. The original antenna is external double channel directional panel antennas and you can select antennas to provide more flexibility regarding jamming coverage. The jamming coverage of this jammer is so strong that the jamming range could reach 500m, but the jamming range is also determined by the strength of signal in given area.
Seen from its function this one jamming device is really a good one. If you are looking for one, come here! High quality and reasonable price is our promise.
Advantages and Features
• Aluminum-alloy casing with high protection has high resistance to dust, water and corroding.
• Heat sink designing combing with the fans to make system in a cooling status.
• Special technology to prevent interference between each frequency band.
• Only interfere downlink frequency of mobile system, without disturb normally working of Base Stations.
• Frequency bands and output power selectable.
• Each frequency band controlled by independent RF ON/OFF switches.
• Power of each frequency band can be adjustable independently.
• Circuit protection to ensure system will not burn out in case of antenna short circuiting or disconnection.
• Antenna type options, directional or Omni-directional antennas option.
• Easy operation and installation.
• Keep for upgrade module installation.
• Working 24 hours/365days continuously.
Specification:
Output Interface | Output Frequency | RF Output watt |
CH1 | CDMA/GSM: 851-960MHz | 50W |
CH2 | DCS/PCS: 1805-1990MHz | 50w |
CH3 | 5G: 3400-3600MHz / 3400-3800MHz | 50w |
CH4 | 3G: 2110-2170MHz | 50w |
CH5 | 4G LTE:(USA:725-770MHz) or (Europe:790-826MHz) | 50w |
CH6 | 4G Wimax:(USA:2345-2400MHz) or (Europe:2620-2690MHz) | 50w |
CH7 | WiFi 2.4G: 2400-2500MHz | 50w |
CH8 | WiFi 5.8G: 5700-5800MHz | 50w |
CH9 | VHF 135-175MHz | 50w |
CH10 | UHF 400-470MHz | 50w |
Total output power | 500W | |
Jamming range | up to 500m,still depends on the strength signal in given area | |
Jammer Module Number | 10 | |
External double channel directional panel antennas | all the TX frequency covered down link only | |
Power supply | 50 to 60Hz, 100 to 240V AC | |
With AC adapter | (AC100-240V-DC27V) | |
Dimension | 420×480×230 mm |
Accessories
Most of us know that in important places like prisons, military meeting and museums, actions have always been taken to prevent the message from being given out. What kind of device can install in these places to reach the purpose, the Rackmount High Power Cell Phone Signal Jammer must be the one which is most suitable.
It can be applied that the common used telecommunication frequency will be blocked when the Police arrest the criminals in order to prevent the criminals gang or Police insider leaking the confidence through the wireless equipments ,so that the arrest collapsed. It also make the criminals not be able to remotely control the bomb in the key entrance of the building so that Police can quickly access to the building and round up the criminals to avoid the casualties.
Protecting the boarder and army patrol from the attack of road- side bomb RCIED denotated by the terrorists.
It can be used to prevent terrorists remotely controlling the bomb bursting points in military protection zone,government buildings and some other important places. It can also make the criminals hidden in the military protection zone not communicate with the outside gang to leak the confidence.