The 1900/65A universal equipment monitor is designed for continuous monitoring and protection of various applications and industries
The equipment used in. This monitor has a low cost, which makes it advantageous for continuous monitoring
The ideal solution for protecting universal machines and processes.
input
The 1900/65A provides 4 sensor inputs and 4 temperature inputs. The software can transmit to each
Sensor input is configured to support 2-wire and 3-wire acceleration sensors, speed sensors, or
Eddy current sensor. Each temperature input supports E, J, K, and T-type thermocouples, as well as 2 or
3-wire platinum resistor.
output
The 1900/65A provides 6 relay outputs, 4 4-20mA recorder outputs, and 1
A dedicated buffer output. Users can use the 1900 configuration software to configure relays,
Make it disconnect based on the normal operation, alarm, and danger status of any channel or combination of channels
Or close the relay contacts. And users can also use the software to provide any recorder input
The data of any variable in the output channel. Dedicated buffer output can provide input for each sensor
Provide signal.
Modbus
® The gateway option enables the monitor to provide static data directly to any Modbus client
Variable, status, event list, time and date information. This client includes distributed control
DCS system, SCADA system, programmable logic control
PLC or System1 ® Software. This monitor uses an internal counter and Modbus
The time reference of the client/host is used to generate time and date information. By ordering
1900/01 communication upgrade (please refer to the "Ordering Information" section), users can upgrade without
Upgrade the monitor of Modbus gateway. 1900/65A via Ethernet and software group
RS232/485 serial port is used to support Modbus communication.
configuration
By using software running on a laptop or PC, users can define the monitor's operation and
Modbus gateway register mapping to create configuration files through built-in Ethernet interface
And download the file to the monitor. 1900/65A will be permanently stored in non-volatile memory
Store configuration information and upload it to the PC for modification.
Display module
1900/65A supports optional display/keyboard to view channel information or configuration data
Make slight changes. This enables the 1900/65A to run as a standalone software package. If necessary,
Users can install displays up to 75 meters (250 feet) away from the monitor module.