24 ports gigabit metal box Ethernet/network switch 1000m for IP camera network solution

Product No.: OTD24PG01

Simple Features
1 24 port gigabit switch
2 very good heat steel case
3 OEM/ODM
4 product pass CE and ROHS certification

Description
It's a high-performance and low-power of 24ports 10/100/1000Mbps Gigabit Ethernet switch. Is the first choice for the formation of small and medium LAN, It provides a backbone link to your switched workgroup or a server, Easy plug and play, flexible non-blocking architecture, users can be exempted from the restrictions of bandwidth and media networks.
The 24port gigabit switch supports standard 802.3x flow control frames for full duplex, and optional backpressure for half duplex, each port to support Auto-Negotiation function. For Broadband local area network provides an economical, practical, cost-effective 10/100/1000Mbps LAN sharing, The same times, for connect to each end-user on the LAN to provide stable performance High-Throughout and full wire speed data transfer, each port support store-forward mode, it can effectively isolate the broadcast storms, reducing the packet error and the wrong packet, to avoid network congestion and conflict. It can to improve bandwidth server and network protocol compatibility. The same time, the LED indicator panel to diagnose the operating status of each port and the entire system, This switch energy saving and environmental protection. The 24port gigabit switch supports IPv4 IGMPv1/v2/v3 and IPv6 MLDv1/v2 snooping.

Applications
The switch is widely used in companies, hotels, office, small Local area network and other.

Features
l Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3ab standards
l 24port 10/100/1000Mbps Auto-Negotiation RJ-45 ports, supporting Auto-MDI/MDIX
l Supports 8K-entry MAC address table with 4-way hash algorithm
l Supports flash SMI Slave interface to access configuration register
l Supports Stacking and QoS
l Supports IPv4 IGMP v1/v2/v3 and IPv6 ML Dv1/v2 snooping
l Support IEEE 802.3x flow control for full duplex mode and backpressure for half duplex mode on all port
l Non-blocking switching architecture that forward and filter packets at wire-speed for maximum throughput
l Support MAC address auto-learning and auto-aging
l LED indicators for monitoring power, link and activity
l 19inch standard steel case design, 440x180x44mm
l 24port 10/100/1000M Gigabit switch module
l Product pass CE and ROHS Certification
l Chip: RTL8389L

Specifications
Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet ANSI/IEEE Std 802.3 Nway Auto-Negotiation
IEEE 802.3x flow control

protocol
CSMA/CD

Transmission Rate
Ethernet 10Mbps (half duplex),20Mbps (full duplex); 10BASE-T:14,880pps/port
Fast Ethernet 100Mbps (half duplex),200Mbps (full duplex); 100BASE-TX :148800pps/port
Gigabit Ethernet 2000Mbps (full duplex), 1000BASE-T :1488000pps/port

Topology
Star

Network Medium
10Base-T:Cat 3 or above Cat.3 UTP(≤100m)
100Base-TX:Cat 5 UTP(≤100m)
1000Base-T:Cat 6 or above Cat.5 UTP(≤100m)

Number of Ports
24port 10/100/1000M RJ45 ports

UPLINK
Any port (support Auto-MDI/MDIX function)

Transmits Method
Store-and-Forward

Temperature
Operating Temperature 0 C~40 C (32 F~104 F)
Storage Temperature -40 C~70 C (-40 F~158 F)

Humidity
Operating Humidity 10%~90% non-condensing
Storage humidity 5%~95% non-condensing

Switch capacity
4.8G

LED Indications
1* power LED(Power: Red)
48* port LEDs(Link/Act: Green)

Dimension(W x H x D)
440x180x44mm

Case Material
19inch Steel case

certificate
CE ROHS

Operating system
Support Windows/MAC OS/Netware/Linux operating system

OEM
OEM/ODM, Can be customized products according to customer

PRODUCT PICTURES