Cooling tower drift eliminators and heavy duty/dura drift eliminators are designed to remove droplets of water from the air and minimize loss of process water. Drift eliminators cause the droplets and air to change direction suddenly. This process causes the water to become separated from the air and put back into the cooling tower. Drift eliminators limit the amount of circulating water emitting from the tower’s exhaust.
In every cooling tower, there is evaporative water loss to the environment. When liquid water becomes entrained in the leaving air stream, however, drift eliminators are used to minimize the amount of water carried out of the cooling tower with the exhaust air.
These water droplets carry the same concentration of impurities as are typically found in cooling towers. Drift eliminators are designed to prevent the droplets and mist from escaping by capturing the droplets and sending them back into the tower. Efficient drift eliminators will keep drift losses to less than .001% of the recirculating water flow rate.
Tech Date | |
Sheet Width(mm) | 140-145mm |
Sheet Length | 1220mm/1000mm/customized |
Thickness | 0.6mm/customized |
Sheet Spacing | 30mm |
Color | black |
1. Maximum drift capture through efficient design
2. Light weight
3. Easy to handle, lift and remove for inspection and service of water distribution system and heat transfer surface (fill and coil)
4. Nested modules to guarantee watertight seam
5. Corrosion free
6. Perfect fit: model specific size kits
FAQ: