Cooling Tower Fill Film Black PVC Fill Pack

This industry cooling tower fill is suit for metric cooling tower. This fill should be fabricated from rigid, corrugated PVC sheets that are conducive to cooling water and UV protected. The froming process of fill is by vacuum thermofroming.

Compare with the other PVC fill, it allows for high water velocity, improve the water distribution and thermal mixing.

This industry cooling tower fill is well adapted to any induced draft or natural draft cooling tower using normal industrial water quality.

Production Details

Cooling Tower Fill, also called cooling tower infill film media. It is one of the most important components in cooling tower. It’s function is increase the exchange area of the gas and working fluid in order to achieve the cooling requirement. The working fluid was distributed onto the fill and spread into a thin film uniformly, by increasing the air-media interface and allowing waste heat to evaporate at an accelerated rate.

The type of symetrical non contact sheet is probably the most thermally efficient fill wordwide. Sharp horizotal corrugations allow even water redistribution on the sheet and water rotation for good contact with air. The offest flut design allows vertical rotation of air with limited pressure drop.

Xcell could supply a wide range of synthetic cooling tower fill for the cooling towers such as the counter flow and cross flow cooling tower fill. For more details, please kindly reference the following catalogue.

All the fills can be supplied in blocks of various sizes or in sheets. As to limit the transportation costs and actual demand, we usually provide the best suggestion for the ordering and shipping method.

Related Cooling Tower Film Fill