Counterflow Cooling Tower Spray Nozzle For BAC Cooling Tower

Key Specifications

• 360 cooling tower spray nozzle, A, AA and pyramid nozzles are grommet for easy inspection and removal
• XF nozzles are gravity flow and can easily be inspected and replaced while unit is in operation
• Kits are available to install 360 spray nozzles in other manufacturers coil products
• Patented design for pressurized or gravity-feed systems guarantees optimum thermal performance
• Large orifice means non-clogging performance for effective wetting of the heat-transfer surface
• Multiple sizes are available to accommodate all system flow rates
• Availability: 1/4" through 1 1/8" orifice for properly metered flow.

Features of cooling tower nozzle

• Ease of maintenance
• Easy snap in/out grommet design
• Large non-clog orifice
• Robust, durable construction
• Universal alignment
• Anti-scale design
• No moving parts
• Eliminates dry spots inherent in other designs
• EAC 360TM spray nozzle can easily replace
• Nozzles in existing EAC units and other manufacturers' units too
• Secured in grommets for easy removal and replacement.
• Patented and lab tested EAC design, preventing scale build-up that -reduces the unit capacity.
• Large orifice 360° umbrella pattern spray, eliminating dry spots.
• Non-clogging design
• For all system flow rates
• For pressurized or gravity distribution system

Caution tip

When cleaning nozzles do not use a screwdriver or other instrument to force debris through the nozzle. The bottom of the nozzle is a target area that diffuses the water over the fill or coil in an umbrella type pattern. If the target area is broken, the water will pour straight onto the coil-fill surface, possibly causing damage to the fill and/or dry spots on the coil. In addition, the debris can now possibly begin to clog the fill.