MTP- MTP Truck Cable for network 24core OM3 (50/125) polarity C trunk cable for 1G to 25G duplex
M310 Series MTP® (MPO) trunk cables form the backbone to the MX Series solution. They are designed for a toolless installation with MX Series modular cassettes or MX Series MTP (MPO) adapters modules and utilise Click-2-Connect® technology for a fast and simple way to grow the network.
These 24 fibre polarity C MTP backbone cables with female connectors will provide an instant link when used with two standard MX Series LC to MTP (MPO) cassettes and will require standard A-B duplex patch cords.
MTP® trunk cables use a lightweight but robust micro core fibre cable and MTP® connectors. They are about 65% lighter and 60% smaller in diameter than traditional tight buffered or loose tube fibre and give the ability to install more fibre into less space. Every trunk cable is supplied with a full test certificate and is traceable though a unique serial number.
Performance:
Polarity | Polarity A, Polarity B, Polarity C | ||||
Fibre Type | OM3 (50 / 125) | ||||
Fibre Capacity | 24 | ||||
Fibre Construction | Micro cable LSZH | ||||
Cable Diameter | 3.0 mm (5.6 mm dual sheath also available | ||||
End 1 | MTP® ELITE 12 Fibre Connector (x2) | ||||
End 2 | MTP® ELITE 12 Fibre Connector (x2) | ||||
Interchangeability | ≤0.2dB | ||||
Insertion Loss across cable | < 0.35 dB + cable loss | ||||
Opterating Temperature | -20℃ ~ +70℃ |
Test:
Single Sheath | Dual Sheath | |
Weight kg/Km | 12 | 28 |
Outer Diameter | 3.8mm | 5.4mm |
Sheath Wall Thickness (nominal ave. mm) | 0.55mm | Inner 0.55mm, outer 0.45mm |
Sheath Wall Thickness (minimum mm) | 0.48mm | Inner 0.48mm, outer 0.35mm |
Maximum pull force | 300 N | 1000 N |
Transport and storage | – 25 °C to + 70 °C | – 25 °C to + 70 °C |
Installation | – 5 °C to + 50 °C | – 5 °C to + 50 °C |
Installed | – 10 °C to + 70 °C | – 10 °C to + 70 °C |
Minimum Bend Radius (installed) | 10 x outside diameter | 10 x outside diameter |
Minimum Bend Radius (installation) | 15 x outside diameter | 15 x outside diameter |
Maximum Crush Resistant (long term) | 150 N/dm | 300 N/dm |
Jacket Colour | OM3 – Aqua | OM3 – Aqua |
Features:
- Ulitize MPO/MTP connectors
- Inner: Ceramic Ferrule
- Available in Elite insertion loss and standarad insertion loss.
- Low loss elite versions are offered, featuring low insertion loww for demanding high speed networks where power budgets are critical.
- They use a simple push-pull latching mechanism for easy and intuitive insertion and removal.
- It provides up to 8, 12, 16, 24 times the density, thereby offering savings in circuit card and rack space.
- Available in OS1/2, OM1, OM2, OM3 and OM4, OM5
- Telcordia’s GR-326-Core, IEC Standard
- Green Production, RoHS Standard
- Interface polished type has PC, UPC and APC
- Support use in attaching directly to 40/100G transceivers
- 100% factory tested, with test results included for each assembly
Application
- Metro
- CATV
- Passive fiber optic networks
- Builing communication center
- Bank Data center
- Communication center rooms
- FTTH (Fiber to The Home)
- FTTA (Fiber to the attena)
- LAN (Local Area Network)
- FOS (fiber optic sensor)
- Fiber Optic Communication System
- Optical fiber connected and transmitted equipment
- Defense combat readiness
Packing:
Our Production line:
Our Certificate: