Product Description

The detection method used by the Conventional Fire Alarm System is smoke and heat. This helps detect fire early enough to prevent it from spreading, which can cause significant damage to property and loss of lives. The smoke detector is designed to detect the presence of smoke in the air, while the heat detector is designed to detect an increase in temperature. Both detectors work together to ensure that the fire alarm system is effective in detecting fire.

These conventional fire panels are designed to be conventional fire panels developed from microprocessor, which can monitor and control 2, 4, 8, 16 zones fire information respectively. Each zone can be connected with 30 conventional fire detectors. Each panel has external devices control output points, Through the points, the panel can control such external devices as bell, siren, flame detector, beam detector etc.

The panel maximum load is 8 sounder outputs. The panel is designed to have internal standby batteries and space for installation (enough for 1 sealed acid storage batteries). The panel can indicate states as normal, fault, fire alarm, short circuit.

Each kinds of panels have the same functions and same installation and operation, except for having different monitoring zones and output points.

Technical Parameters

Support and Services

The Conventional Fire Alarm System product technical support and services include:

- Assistance with product installation, programming, and operation.

- Troubleshooting and diagnosis of technical issues.

- Software and firmware updates.

- Maintenance and repair services.

- Training and educational resources for end-users and installers.

Product Range

Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector