MachineU > China Products > Security & Protection
180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service
180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service
180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service
180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service
Specifications
Brand Name :
XHA
Model Number :
XHARS602
Certification :
CE
Place of Origin :
China
MOQ :
1PCS
Price :
negotiable
Payment Terms :
T/T, Western Union
Supply Ability :
1000PCS/Month
Delivery Time :
7 Working days
Packaging Details :
360*250*460mm/Carton
Type :
UV Flame Detector
Spectrum :
180~290nm
Power Supply :
12-28V DC
Detection Angle :
120degree
Certifications :
CE, RoHS
Installation :
Ceiling or wall mounted
Alarm Output :
Relay output, normally open or normally closed
Response Time :
Less than 3 seconds
Description

Effective Fire Detection With Spectrum Of 180-290nm UV Ultraviolet Fire Alarm Flame Detector

180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service


Introduction

The detector employs a UV photosensitive tube to detect the ultraviolet rays emitted by flames. This allows it to rapidly identify the presence of fire with a high degree of accuracy.The UV sensing mechanism enables the detector to provide a fast response time, crucial for applications involving flammable or explosive materials.The detector is designed to be immune to false alarms caused by factors such as sunlight, dust, oil, fumes, and humidity. It also provides a dry contact relay output that can be directly connected to a fire alarm control panel, allowing for immediate alarm notification and system integration.

This Ultraviolet Flame Detector is primarily designed for use in high-hazard environments where flammable or explosive materials are handled or stored, such as:

Petrochemical plants
Munitions factories
Oil and gas processing facilities
Chemical storage warehouses
Fueling stations
Other industrial or commercial settings with a high risk of fire.



Specification
Operating Voltage Range: 12 to 28 VDC Volts
Standby Current: ≤10 mA @ 24 VDC
Alarm Current ≤30 mA @ 24 VDC
Spectrum: 180~290nm
Detection Angle: 120 degree
Detection Sensitivity: Grade I, 25m@flame (Container 33cmX33cm,Height 5cm with 2Kg ethanol )
Relay Contact Load: 1A@DC24V
Normal Status: LED blinking in 5 seconds interval
Alarm Status: LED lit steady
Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing
Operating Temperature Range: -20°C to 55°C

180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service

Installation
NOTE: All wiring must conform to applicable local codes, ordinances, and regulations. Mounting Indoor Wall or Ceiling Products.
1. Attach mounting base to ceiling or wall.
2. Connect field wiring to terminals:
Terminal 1: Relay Output -COM (ZONE+)
Terminal 2: Relay Output - NO/NC (ZONE-)
Terminal 3: DC Power -
Terminal 4: DC Power +
3. To attach product to mounting base.
4. Secure product by tightening the two mounting screws in the front of the product housing.
5. The detector can be connected with Security alarm panel as Figure3. Relay output signal can be changed from Normal Close (NC) to Normal Open (NO) by Jump JP1 on the PCB board.
6. The detector can be connected with conventional alarm panel as Figure 4. One 4.7K ohm resistor should be connected as End of Line (EOL) resistor at the last detector.
7. After the installation, power on the detector, use lighter or candle to test the detector within 3 meters.

Application in Conventional Fire Alarm system

180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service

Product Range

Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector



Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.


Send your message to this supplier
Send Now

180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service

Ask Latest Price
Product Detail
Brand Name :
XHA
Model Number :
XHARS602
Certification :
CE
Place of Origin :
China
MOQ :
1PCS
Price :
negotiable
Contact Supplier
180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service
180-290nm Spectrum Fire Alarm Flame Detector OEM / ODM service

Shenzhen Xinhe'an Technology Co., Ltd.

Verified Supplier
2 Years
guangdong, shenzhen
Since 2001
Main Products :
Conventional Fire Alarm System, Addressable Fire Alarm System, Gas Extinguishing System
Total Annual :
4300000-7140000
Employee Number :
40~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Fire Alarm Flame Detector
MachineU China Products Security & Protection
Contact Supplier
Submit Requirement