MachineU > China Products > Security & Protection
2 Wire Fixed Rate Of Rise Heat Detector ROR For Conventional Safety Fire Alarm System
2 Wire Fixed Rate Of Rise Heat Detector ROR For Conventional Safety Fire Alarm System
2 Wire Fixed Rate Of Rise Heat Detector ROR For Conventional Safety Fire Alarm System
2 Wire Fixed Rate Of Rise Heat Detector ROR For Conventional Safety Fire Alarm System
Specifications
Brand Name :
XHA
Model Number :
YT105
Certification :
CE
Place of Origin :
China
MOQ :
1
Price :
negotiable
Payment Terms :
T/T, Western Union
Supply Ability :
10000PCS/Month
Delivery Time :
3 Working days
Packaging Details :
100pcs/carton
Product Type :
Heat Detector
Certificaiton :
EN54
Apaitplicon :
Fire Safety System
Wired :
2 wire
Specification :
D103mm, H55mm
Weight :
155g
Description

2 Wire Fixed Rate-of-Rise Heat Detector for Conventional Fire Safety Fire Alarm System

2 Wire Fixed Rate Of Rise Heat Detector ROR For Conventional Safety Fire Alarm System



Introduction

The device is photoelectronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every 3~5 seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.


Parameters
Product Name Conventional heat detector Rated operational voltage 15 to 28VDC Volts Non-polarized
Fixed Temperature Rating: 135°F (57°C) Static current ≤40µA @ 24 VDC
Alarm current ≤30mA @ 24 VDC Work temperature -10°C~+50°C
Certification EN54 Humidity ≤95%.
Size 103*103*55mm Weight 155 g

Installation

IMPORTANT: The detector must be tested and maintained regularly following NFPA 72 requirements. The detector should be cleaned at least once a year.
INSTALLATION
NOTE: All wiring must conform to applicable local codes, ordinances, and regulations.
NOTE: Verify that all detector bases are installed, that the initiating-device circuits have been tested, and that the wiring is correct.
Remove power from initiating-device circuits before installing detectors.
1. Wire the sensor base per the wiring diagram, Figure 1.
2. Install the sensor into the sensor base. Push the sensor into the base while turning it clockwise to secure it in place.
3. After all sensors have been installed, apply power to the control unit.
4. Test the sensor(s) as described in the TESTING section of this manual.
5. Notify the proper authorities that the system is in operation.

Warning:Forbid connect 24VDC directly without current-limiting resistance. Otherwise, the detector would be burnt out.

Terminals functions description:


Terminal 2: IN+( Zone Input+)
Terminal 5: IN- (Zone Input- )
Terminal 6: IN+( Zone Output+)
Terminal 5: IN- (Zone Output- )
Terminal 6: Remote Indicator+
Terminal 3: Remote Indicator


Product range

Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector



Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.



Send your message to this supplier
Send Now

2 Wire Fixed Rate Of Rise Heat Detector ROR For Conventional Safety Fire Alarm System

Ask Latest Price
Product Detail
Brand Name :
XHA
Model Number :
YT105
Certification :
CE
Place of Origin :
China
MOQ :
1
Price :
negotiable
Contact Supplier
2 Wire Fixed Rate Of Rise Heat Detector ROR For Conventional Safety Fire Alarm System
2 Wire Fixed Rate Of Rise Heat Detector ROR For Conventional Safety Fire Alarm System

Shenzhen Xinhe'an Technology Co., Ltd.

Verified Supplier
2 Years
guangdong, shenzhen
Since 2001
Main Products :
Conventional Fire Alarm System, Addressable Fire Alarm System, Gas Extinguishing System
Total Annual :
4300000-7140000
Employee Number :
40~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Conventional Fire Alarm System
MachineU China Products Security & Protection
Contact Supplier
Submit Requirement