Cage Car Body Aluminum Rebar Mesh Heavy Duty Semi-Automatic Welding Machine

Product Introduction

The multi head stationary spot welder is customized for welding the car fuel tank. This stationary Spot Welding Machine is working on the 380V/50Hz three-phase AC power supply.By the three-phase rectifier, inverter technology and the feedback control system, to control the welding heat, pre-press time, the maintenance time and cease time, achieving the welding requirements. The machine is widely used in automobile, home appliances, electronic instrumentation, aerospace and other projection welding process industry.

Technical Parameters

Advantages

1. The welding current is DC. When there are inductive/magnetic materials in the secondary winding, the welding will not be affected;

2. The three-phase power supply is more adaptable to the fluctuation and voltage drop of the power grid;

3. The process is more reliable, and DC welding will be better for most of the metals with resistance welding;

4. Reduce operation cost, including saving welding energy at each point and shortening welding cycle;

Major Structure

The equipment host is mainly composed of the equipment host, upper and lower electrode components, fixture components, welding controller, PLC controller, touch screen components, water and gas circuit components, etc.

Clamp Assembly

.The floating worktable and the center positioning tooling realize the accurate positioning of the workpiece.

.The worktable depends on the floating spring to float the workpiece height in Z-axis.

.The angle adjustment axis allows the workpiece to rotate around the X axis, thereby adjusting the angle.

.The manual clamp can quickly take and place the workpiece.

Safety Precautions of Welding Fume and Toxic Gas

A large amount of smoke and toxic gas will be generated during welding, which will be harmful to health if inhaled. Welding in narrow places will lead to insufficient air and suffocation.

1. Keep the head away from welding smoke and do not inhale the smoke and dust generated by welding;

2. If welding is carried out in an enclosed room, please use ventilation and exhaust facilities to discharge the smoke and toxic gas generated by welding;

Images

Application

Frequently Asked Questions

1. When can you arrange shippment?
The shippment is 15 days after getting deopsit, but customized machines should be more than 25 days.

2.Do you inspect the finished products?
Yes, each step of production products will be came out inspection by QC department before shipping.

3.Are you factory?
Yes, we are factory, all machine is made by ourself and we can provide customize service according to your requirement.

4.How to buy your Spot Welder?
Please send us inquiry to our email, and we will give you a PI to send us payment.

5. How to contact you?
You can send a mail for us and call us.

6.How will you deliver my goods to me?
We always ship by air and sea in the mean time.

7.How about your transport packing? Is it possible to damage the machine during the transportation?
We have rich experience on international transportation. All the packing are extra thickness carton filling with protective PE foam and waterproof membrane. No damage happened during transportation until now.

8.What kind of payment do you accept?
T/T, Western Union, PayPal, .L/C, D/A, etc.