Multi Channels Steel Plants Working Area Toxic Gas Monitor Use Co Gas Detector Control Panel Gas Alarm System

Product Description:

The YA-K300 series gas alarm controllers can be used in conjunction with our YA-D gas detectors to create industrial gas control systems. These products are specifically designed for industrial environments and are both gas detection and early warning systems. The controller boasts a 4.3-inch industrial LCD display which provides clear and eye-catching information about the concentration of gas measured. Once the concentration exceeds the alarm limit, the system will trigger an audible and visual alarm.

The product is also equipped with multiple output relays which can activate and control equipment such as exhaust fans, solenoid valves, etc. These relays can be used in active and passive ways depending on the specific field conditions. The product design is in accordance with national standards and has many advantages such as fast response speed, high reliability, low failure rate and easy maintenance.

In particular, the product uses a multiple event delay confirmation method when judging alarm failures. This effectively reduces false alarms and provides a strong guarantee for the safety of life and property.

Wall-mounted installation is available for the controller. It works alongside the detector and processes the data collected by the detector through the single-chip microcomputer. After processing, the controller displays, outputs, and controls the different functions based on the data received.

Features:

YA-K300 gas alarm controller host is embedded with a microprocessor that contains various functions such as complete detector signal sampling, key scanning, alarm display, and more. The microprocessor offers the capability of data real-time calculation, power and system fault detection, display driver, alarm peripheral driver, among others.

The system is intelligent and supports %LEL,PPM,mg/m³,ug/m³,%VOL, and other measurement units. It also has 2 sets of common relays and 8 sets of programmable relays with passive outputs that easily connect to various external devices.

The controller supports two communication modes – 4-20mA and 485 bus and is easy to install. Real-time monitoring of the measured gas concentration in the detection area is achievable. When the gas concentration reaches or exceeds the set alarm value, the controller will issue sound, light, and voice broadcast alarm signal. Fault detection and acoustic and optical alarm functions are also available.

Connected external devices can act on their own when the preset logic relationship is satisfied. Additionally, external devices can be started through the controller. With the capability of storing more than 2000 data records, the YA-K300 series Gas alarm controller offers a comprehensive solution to gas detection and safety.

Technical Parameters:

Applications:

The YA-K300 Gas Alarm Controller is designed to work with the YA-D Detector Series, providing accurate and reliable gas detection for a variety of gases, including methane, propane, hydrogen, and more. This gas alarm controller is perfect for use in industrial facilities, laboratories, and other settings where gas leaks can be a safety hazard.

The YA-K300 Gas Alarm Controller is easy to install and features an IP30-rated enclosure to protect against dust and water ingress. With dimensions of 432*284*83mm, this gas alarm controller can be easily mounted in a variety of locations. Plus, with a DC24V±25% output supply voltage, you can be sure that your gas alarm controller will provide a reliable power source for your detectors.

If you're looking for a high-performance gas alarm controller, the YAOAN YA-K300 Gas Alarm Controller is an excellent choice. With its support for up to 8 4-20 mA inputs and 99 RS485 data inputs, this gas alarm controller is ideal for a wide range of applications. Whether you need a 4 channel gas alarm controller for your industrial facility or laboratory, the YA-K300 Gas Alarm Controller is the perfect solution. So why wait? Order your YAOAN YA-K300 Gas Alarm Controller today and enjoy the peace of mind that comes with reliable gas detection.

FAQ:

Q: What is the brand name of the gas alarm controller?

A: The brand name of the gas alarm controller is YAOAN.

Q: What is the model number of the gas alarm controller?

A: The model number of the gas alarm controller is YA-K300.

Q: Where is the gas alarm controller manufactured?

A: The gas alarm controller is manufactured in Shandong, China.

Q: What gases can the gas alarm controller detect?

A: The gas alarm controller can detect various gases, including natural gas, methane, propane, and carbon monoxide.

Q: What is the warranty period for the gas alarm controller?

A: We are sorry, but we cannot answer that question as it is excluded from the scope of this task. Please refer to the product manual or contact the manufacturer for more information about the warranty.