Dogs / Cats Clinical Refractive Index Refractometer ATC With Aluminum Construction

Feature:

• Automatic Temperature Compensation (ATC) Range: 10C-30C(50F to 86F)
• Heavy duty Equipped with scale measurement that provides direct reading
• Approved by strict quality and safety standards
• Durable and built to last long
• Heavy-duty and lightweight with its aluminum construction
• Easy to focus and calibrate
• Accurate testing results guaranteed
• Made with the highest and finest quality of aluminum & rubber that makes it lightweight
• Cushioned with soft & comfortable non-slip rubber
• Extremely easy-to-use and calibrate

​

Specifications

• Structure: Refractive prism + cover + calibration bolt + eyepiece + optical system piping
• Widely used to test Juice,Soybean milk,Milk,wine, beverage, fruit and honey etc.

Directions for use:

Using soft cloth to clean the prism and testing prism, take a few drops of solution, put it on the prism, close

the cover plate, escape from bubbles, to make the solution over the surface of prism.

Put the instrument into the version of alignment or light department, eyes can observed the field through

Eyepiece. Rotate eyepiece to adjust hand wheel. to make the field of view of blue and white points

clear.The scale of demarcation line is the density of solution..

Calibration and correction of temperature:

It must revise Zero before measure.First,take few drops of distilled water,put it on the detection prism,and

then screw the bolt of Zero so that make it reach 0%,Second,clean the detection prism to inspection.Some

models of instruments have to take place standard liquids of distilled water to revise.

Notice lists:

The instrument is precision optical instrument. You should pay attention to the following matters when it

was used and maintained:

(1)It must be careful and cautious when it was used. in accordance with the use of instruction strictly, can”t

loose each connected component of apparatus, can”t drop,collision, can”t happen drastic vibration.

(2)After using it, can”t put it into water for cleaning directly, should use soft cloth to clean. For optical

surface,it cannot be bruised and scratched.

(3)The instrument should be set in a dry,non-corrosive gases place to safe keep.

(4)To avoid loss of spare parts of components.