YIERYI Range:0~1999mg/LmV Digital Handheld ORP Tester ORP Meter ORP-B Water Hydroponics
Specifications:
- Pen type ORP Tester|ORP Meter|ORP Pen
- Range: 0~±1999mg/LmV
- Resolution: 1mV
- Accuracy : ±5 mV
- Batteries :4 x 1.5V alkaline(Included)
- Environment: 0 to 50°C,RH 95% max
- Calibration :1point
- Dimensions :175x41x23mm
- Weight :72g
Operation:
- Remove the protective cap. Do not be alarmed if white crystals appear around the cap.
- This is normal with ORP electrodes and they dissolve when rinsed with water.
- Turn the meter on sliding the switch on the top.
- Immerse into solution up to the max immersion level.
- Stir gently and wait until the display stabilizes.
- After use, switch off ORP meter,, use the water clean the electrode and replace the protective cap.
- Do not use distilled or deionized water for storage purposes.
- Large fluctuations in readings could be due to lack of calibration, dry electrode or rundown batteries.
- Attention :during 2-3 weeks, put electrodes in 3mol/L KCL solution for 12 hours, to make sure the reading within accuracy.
Packing List:
- 1 * ORP Meter
- 1 * Screw Driver
- 1 * Instruction Manual
