Concentric cable Airdac Sne/CNE copper conductor XLPE insulation XLPE sheath 4mm2 6mm2 10mm2 16mm2
Ⅰ Applications
The concentric cable is used as electric service entrance from the power distribution network until meter panel ,and as feeder cable from the meters panel until the panel or general distribution panel,just as it is specified in the National electric code,
This type of conductor can be used in dry and wet place,directly buried or outdoor;
It’s maximum temperature of operation is 70℃( PVC or PE insulation) or 90℃ (XLPE insulation) and it’s voltage of service for all the applications is 600V.
Ⅱ Specification
1. Conductor : Copper or Aluminum or 8000 series Aluminum Alloy
2. Insulation: PVC or PE or XLPE
3. Concentric neutral: Copper or Aluminum or 8000 series Aluminum Alloy
Sheath: PVC or PE or XLPE
Copper conductor XLPE Insulated Bare Neutral 4mm 6mm 10mm 16mm Airdac Cable Concentric cable.
Standards
ASTM IEC BS and so on
Voltage:
600/1000V
Concentric Cable Construction
Conductor
Plain copper or aluminum conductors, IEC 60228, solid or stranded versions, conductor types
10-16 mm² round, solid conductors .
10-25 mm², stranded conductor.
35-240 mm², sector shaped conductor, stranded
Insulation
PVC(Polyvinyl Chloride ), XLPE(Cross-Linked Polyethylene)
Filler
PVC(Polyvinyl Chloride)
Concentric Conductor
Copper wires , Aluminum wires
Sheath
PVC(Polyvinyl Chloride)
Minimum Bending Radius
Single Core: 15* overall diameter
Multi Core: 12* overall diameter
0.6/1kV 1+1-core Cu(Al)/PVC/PVC Concentric Conductor Cable |
Nominal cross sectional area of conductor(mm2) |
1×10+1×10 |
1×16+1×16 |
1×25+1×25 |
2×10+1×10 |
2×16+1×16 |
2×25+1×25 |