Cable Solidal Aluminium 16sqmm Single core With 4 Insulated Copper Communication Core Overhead Concentric Service Cable

1 Applications

The concentric cable is used as electric service entrance from the power distribution network until the meter panel (especially where it is required

to prevent "black" losses or electric power robbery), and as feeder cable from the meters panel until the panel or general distribution panel, just as

it is specified in the National Electrical Code.

This type of conductor can be used in dry and wet places, directly buried or outdoors; its maximum temperature of operation is 70 ºC and its

voltage of service for all the applications is 600 V.

Standards

IEC BS and so on

Voltage:

600/1000V

Concentric Cable Construction

Conductor

Aluminum conductors, IEC 60228, solid or stranded versions, conductor types

10-16 mm² round, solid conductors.

10-25 mm², stranded conductor.

35-240 mm², sector shaped conductor, stranded

Insulation

XLPE

Inner Sheath

PVC(Polyvinyl Chloride)

Concentric Conductor

Aluminum wires+4 core insulated copper wire

Sheath

PVC(Polyvinyl Chloride)

Minimum Bending Radius

Single Core: 15* overall diameter

Multi Core: 12* overall diameter

Concentric Split single phase service cable, 4mm to 35mm Plain annealed stranded copper phase conductor,XLPE insulated surrounded by a concentric layer of plain annealed solid copper neutral conductors.XLPE insulated and plain annealed solid strand bare copper earth conductors,PVC outer sheath. Black.600/1000 voltsgrade to BS7870.

Choose a cable type

2.Technical data

Electrical Information

Conductor identification : Brown live/Blue neutral.
Should not be installed at temperatures below 0oc or above + 60oc
.Also available in Violet outer sheath in 6mm, 10mm, 16mm & 25mm.