Short-circuit 12 Volt LED Power Supply 201W 16.5A IP20 EN1122
Quick detail:
Power: 200W
Current: 16.5A
Output: DC 12V-24V
Input: 176-264VAC
Efficiency : 80%
Warranty: 2 years
Description:
Double AC input voltage controlled by switch
Protection: short-circuit, overload, overheat
Naturally air cooled
LED power indicator
100% full-load aged
Holds on 300 VAC surge for 5 sec.
Working temperature up to 60℃
5G vibration tested
High efficiency, long life span, and high reliability
Specifications:
Product No. | S-200-12 | S-200-15 | S-200-24 | S-200-48 | |||
Output | DC voltage | 12V | 15V | 24V | 48V | ||
Capacity of current | 16.5A | 1.3A | 8.3A | 4.2A | |||
Range of current | 0-16.5A | 0-1.3A | 0-8.3A | 0-4.2A | |||
Power | 200W | 200W | 200W | 200W | |||
Noise max. 2 | 150mVp-p | 180mVp-p | 240mVp-p | 250mVp-p | |||
Voltage adjustment | 10.8-13.2V | 13.5-16.5V | 22-27.6V | 44-52V | |||
Voltage accuracy 3 | ±1% | ±1% | ±1% | ±1% | |||
Linear Adjustment 4 | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||
Load adjustment 5 | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |||
Start and rise time | 1000ms,30ms/230VAC 1000ms,30ms/110V | ||||||
Hold time (Typ) | 50ms/230VAC 10ms/115AC | ||||||
Input | Voltage range | AC 110V±15%/AC 220±15% change by switch | |||||
Frequency range | 50HZ/60HZ | ||||||
Efficiency (Typ) | 80% | 81% | 82% | 82% | |||
AC current (Typ) | 3.7A/110V 1.8A/220V | ||||||
Surge current (Typ) | Cold start: 65A/230VAC | ||||||
Current leak | <2mA/240VAC | ||||||
Protection | Overload | Greater than 105% of capacity | |||||
Protection mode: hiccup, automatic restoration after abnormity removed | |||||||
Overvoltage | |||||||
Overheat | |||||||
Environment | Working temp. | -20~+60℃ (see tenuation curve) | |||||
Working humidity | 20~90% RH, without condense | ||||||
Storage temp & hmdty | -40~+80℃ | ||||||
Temp. coefficient | ±0.03%/℃ (0~50℃) | ||||||
Vibration proof | 10~500Hz, 5G 10min / cycle,X,Y,Z axes 60 min each | ||||||
Safety reg. & EMC | Safety regulation | GB195110.1-2004/IEC61347-1:2003 CE(EMC+LVD) | |||||
Voltage proof | I/P-O:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||||||
insulation resistance | I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/70% RH | ||||||
EMC irradiation | EN 55015:2006;EN61000-3-2:1995+A2:2005 | ||||||
EMC disturbance proof | EN 61000-3-2:2006; | ||||||
Dimensions | 200*110*50mm(L*W*H) | ||||||
Packing | 0.72kg/PCS;24PCS/18.2kg |
Competitive Advantage:
· built-in EMI filter
· 100% load test
· Full range of input voltage
· output voltage accurate and stable
· Output over-voltage, over-current and short-circuit protection
· Output low ripple and noise
· Two year warranty
· Average working no trouble >50, 000 hours
Quality assurance:
Delivery: