HP-PV series-HIGH FREQUENCY OFF-GRID ENERGY STORAGE INVERTER
PRODUCT FEATURES:
1. Pure sine wave off-grid optical storage integrated machine
2. Output power factor 1
3. Optional high-power charging current
4. Wide DC input range
5. Optional input voltage range for household appliances and personal computers
6. The mains/solar input priority can be configured through the LCD setting to be compatible with AC power or generator power
7. Automatic restart when the utility power is restored, overload and short circuit protection
8. Smart battery charger design to optimize battery performance
9. Cold start function, optional dust net, support generator
PRODUCT DESCRIPTION:
The HP-PV series is a pure sine wave high frequency solar inverter
control all-in-one machine, which contains MPPT photovoltaic controller,Three functional modules of AC charger and inverter; the controller adopts advanced MPPT calculation methodAnd intelligent battery management to ensure the maximum energy acquisition; the inverter adopts high frequency design,It has the advantages of high power density, small size,simple operation, high efficiency of the whole machine, and low no-load loss.It is
widely used in household systems, communication base stations, monitoring systems, pastoral areas, auxiliary power supplies, etc.
Rated Capacity | 3000VA/3000W | 5000VA/5000W | ||
Model HP-PV | HP-PV3K-24 | HP-PV5K-48(9 parallel machines) | ||
enter | Input system | L+N+PE | ||
Rated input voltage | 208/220/230/240VAC | |||
voltage range | 170 ~ 280VAC (computer equipment); 90 ~ 280VAC (household appliance) | |||
Frequency Range | 50Hz / 60Hz (adaptive) | |||
Output | Output system | L+N+PE | ||
The output voltage | 208/220/230/240VAC±5% | |||
Output frequency | 50/60Hz±0.1% | |||
Waveform | Pure string wave | |||
Switch time | Computer equipment 10ms, household appliances 10ms | |||
Peak power | 6000VA | 10000VA | ||
Overload | Battery mode: 1min@102%~110% Load 10s@110%~130% Load3s@130%~150% Load200ms@ >150% Load | |||
Peak efficiency (battery mode) | >93% | >94% | ||
Battery | Rated voltage | 24 VDC | 48 VDC | |
Constant voltage charging voltage (can be set) | 28.2 VDC | 56.4 VDC | ||
Floating charge charging voltage (can be set) | 27 VDC | 54 VDC | ||
charger | PV charging method | MPPT | MPPT | |
PV maximum input power | 1500W | 5500W | ||
MPPT tracking range | 30 ~115 VDC | 120~430 VDC | ||
Maximum PV input voltage | 145VDC | 450 VDC | ||
Maximum PV charging current | 60 A | 80 A | ||
Maximum city charge charging current | 60 A | 80 A | ||
Maximum charging current | 120 A | 80 A | ||
show | LCD interface | 2 × 8pin / PITCH 2.54mm, support 128-bit segment code, up to 4 buttons +4LED, can display Run mode / load / input / output, etc. | ||
interface | RS232 | 5PIN / PITCH 2.0MM, Porter rate 2400 | ||
Expansion slot communication interface | 2 × 5PIN / PITCH 2.54MM, lithium battery BMS communication card, WiFi card, dry interface card, etc. | |||
Parallel interface | Macout function | Parallel function | ||
Environmental parameters | Run ambient temperature | 0 ~40℃ | ||
Operating environment humidity | 20% ~ 95% (no condensation) | |||
Storage temperature | -15 ~60℃ | |||
Altitude | The altitude should not exceed 1000m, 1000m or more, up to 4000M, | |||
noise | ≤50db | |||
Physical parameters | Machine size (mm) | 465*300*115mm | ||
Package dimensions (mm) | 515*365*175mm | |||
Weight (for reference) | 9.5 | 10 | ||
10.5 | 11 |