MachineU > China Products > Packaging & Printing > Packaging Auxiliary Materials > Lids, Bottle Caps, Closures
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Specifications
Brand Name :
Yogel
Model Number :
DI-ECL-5/3.5-T
Certification :
RoSH
Place of Origin :
Shanghai
MOQ :
1
Price :
USD 0.3 to 0.75 per Set
Payment Terms :
L/C, T/T, Western Union
Supply Ability :
200,000 Sets per Month
Delivery Time :
5-8 work days
Packaging Details :
Inner PE bags, Outer Cartoon: 59x33x22cm
Body :
Polycarbonate
Seal / O-Rings :
Nitrile Rubber (NBR)
Washer :
Polyacetal
Internal Teeth / Grip Ring / Lock Claws :
Stainless-Steel
Collar :
Polyacetal
Collet :
Polyacetal
Description

Microduct Connectors & Sealing

Direct Install – Blown Fiber Push-fit

End Caps with Locking Clips

Description

The end cap for permanent or temporarily sealing of unused microducts to prevent obstacles such as water, mud, dust and so on. The microduct end cap can also be used in conjunction with the Gas and Water Block Connectors during installation of microducts into existing ducts.

The body is transparent for easy fault location and fix the problem easily during installation.

Features

  • Provides high-tensile, pressure-tight end seal for microducts
  • Base body made of impact-resistant material (proven with spade test- followed by pressure test)
  • Transparent base body for visual inspection of the connection
  • Clamping teeth made of corrosion-free spring steel (tested according to EN 61386‑24 or EN 61386‑1)
  • Pre-fitted locking clips prevent accidental disengage when installed
  • Suitable for direct bury below ground and blow-in pressures up to 15 bar
  • Internal pressure test according to DIN 16874 (170 h/80 °C/4.0 MPa)
  • Can be removed and reused if necessary
  • Also suitable for in-house use, flame-retardant according to EN 61386-22 and halogen-free

Structure & Material

Micro duct End Caps with Locking Clips

No. Item Material & Description
1 Body Polycarbonate
2 Seal / O-Rings Nitrile Rubber (NBR)
3 Washer Polyacetal
4 Internal Teeth / Grip Ring / Lock Claws Stainless-Steel
5 Collar Polyacetal
6 Collet Polyacetal
OD Outer Diameter
ID Inner Diameter
DI Direct Install
DB Direct Bury

Notes:

  1. Please confirm the microduct outer diameter whether has damaged or scratches, connection face must be clean.
  2. Please confirm the microduct outer diameter nominal tolerances meets土0.1mm.
  3. Please make sure the connection microduct end face is cut into rectangular plane.
  4. Please confirm the microduct should be through the sealing ring, have been pushed to the end of the joint, until it couldn't go far again.
  5. After connecting the microducts, must check whether the duct can pull, then put into use.
  6. When disassemble the microducts, please make sure the pressure is 0.

Specifications

Blowing Pressure

Between temperatures of -10°C and +40°C, all listed connector sizes can be used for blowing operations at pressures up to 16bar.

Between +40°C and +65°C, blowing pressures for 10mm and larger should not exceed 10bar.
Gas Tightness

Leakage at 8 bar gas pressure: 1ml/minute approx.

Leakage at 0.7 bar gas pressure: 0.01ml/minute approx.
Water Ingress The connectors shall seal against a 6m head of water
Insertion force 50N max (5kg)

Retention force

(collet not held in)

25N min (3mm m/d) 125N min (8mm m/d)

55N min (5mm m/d) 125N min (10mm m/d)

Order Information

Specification Duct OD (mm)
End Cap ECL-3 3
End Cap ECL-4 4
End Cap ECL-5 5
End Cap ECL-6 6
End Cap ECL-7 7
End Cap ECL-8 8
End Cap ECL-8.5 8.5
End Cap ECL-10 10
End Cap ECL-12 12
End Cap ECL-12.7 12.7
End Cap ECL-14 14
End Cap ECL-16 16
End Cap ECL-18 18
End Cap ECL-20 20
End Cap ECL-22 22

Micro duct End Caps with Locking Clips

Product tags

heat shrink connector kit

,

heat shrink butt connector

,

heat seal connector
Send your message to this supplier
Send Now

Micro duct End Caps with Locking Clips

Ask Latest Price
Product Detail
Brand Name :
Yogel
Model Number :
DI-ECL-5/3.5-T
Certification :
RoSH
Place of Origin :
Shanghai
MOQ :
1
Price :
USD 0.3 to 0.75 per Set
Contact Supplier
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips
Micro duct End Caps with Locking Clips

Shanghai Yogel Communication Equipment Co., Ltd.

Site Member
5 Years
shanghai, shanghai
Since 2012
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer, Trading Company, Seller
Main Products :
Single-mode Fiber Optic Patch Cables, PM Fiber Optic Patch Cables, Multi-mode Fiber Optic Patch Cables
Total Annual :
5.5 Million-7 Million
Employee Number :
51~100
Certification Level :
Site Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Microduct Connectors
MachineU China Products Packaging & Printing Packaging Auxiliary Materials Lids, Bottle Caps, Closures
Contact Supplier
Submit Requirement