Microduct Connectors & Sealing
Bulkhead Connector
Straight Connectors for Ducted Cable Networks
Description
The Bulkhead Connector is used for distributing and arranging the inner tubes of bundled microduct on the frame combined by the Mounting Rack and Patch Panel, which is mostly installed in the MDF room of the building. The structure of the bulkhead is to fix the connector to the hole of the Patch Panel. It’s also suitable to apply in Air Blown System.
Features
* Material: POM
* Leakage Pressure: 15 bar
* Negative Pressure: 750mm Hg (10 Torr)
* Proof Pressure: 25 bar
* Temperature Range: -10 ~60℃
* For Tubing Type: PE, PU, Nylon, Polyurethane
* Burst Pressure: > 25bar
* Water Immersion test: Pass (Waterproof)
* Push-fit test: Pass
* Hydraulic pressure test: Pass (Resisting at 13 bar for 2 minutes)
Order Information
Specification | Duct OD/ID (mm) | THR Bore(mm) | Mounting Hole (mm) |
Bulkhead BSC-5/3.5 | 5/3.5 | 3.5 | 12 |
Other Types
Model No. | Duct OD/ID (mm) | Mounting Hole (mm) |
BMC6/4 | 6/4 | 14 |
BMC8/6 | 8/6 | 16 |
BMC10/8 | 10/8 | 20 |
BMC12/10 | 12/10 | 22 |
BMC14/10 | 14/10 | 24 |
More footprint types are available, please contact us for more information.