Lithium Ion Battery Features
【Deep Cycle Battery】:12v lifepo4 battery provides >2000+ cycles compared to 300~500 cycles in lead acid battery.The service life of LiFePO4 batteries is 8 to 10 times than the standard lead-acid batteries.The weight of the lithium iron phosphate battery is 30% lighter than the lead-acid battery of the same capacity.Brand: YouNatural,Size:151 x 99 x 101 mm,Color: Black.
【Built-In BMS & Convenience 】:Built in circuit protection BMS (Battery Management System) to protect it from overcharge, over-discharge, over-current, and short circuit with excellent self-discharge rate. Plus, Li-Ion batteries can be safer than Lead Acid batteries, which have no protection against ground faults.
【Widely Used】: 12v lifepo4 battery can be used in the following areas: Home energy storage system, UPS backup, lighting, digital/CCTV cameras, portable TV, e-Robot, electric vehicles, DIY loud speaker, 12V router, air pump, fish finder, golf car, trolling motor, motorhome/RV & camper, Houseboat, Travel Trailer, Dump Trailer and more. When the batteries are used in parallel or series, the battery voltage and capacity must be the same.
ELECTRICAL PERFORMANCE | |
Nominal Voltage | 12.8 V |
Nominal Capacity | 10 Ah |
Capacity @ 2A | 300 min |
Energy | 138 Wh |
Resistance | ≤40 mΩ @ 50% SOC |
Self Discharge | <3% / Month |
Cells | IFR26650EC |
CHARGE PERFORMANCE | |
Recommended Charge Current | 2.0 A |
Maximum Charge Current | 10 A |
Recommended Charge Voltage | 14.6 V |
BMS Charge Cut-Off Voltage | <15.6 V (3.9V/Cell) |
Reconnect Voltage | >14.4 V (3.6V/Cell) |
Balancing Voltage | <14.4 V (3.6V/Cell) |
Maximum Batteries in Series | 6 |
DISCHARGE PERFORMANCE | |
Maximum Continuous Discharge Current | 15 A |
Peak Discharge Current | 30 A (3s) |
BMS Discharge Cut-Off Current | 45 A ± 5 A (31 ms) |
Recommended Low Voltage Disconnect | 11.0 V (2.75V/Cell) |
BMS Discharge Cut-Off Voltage | >8.0 V (2s) (2.0V/Cell) |
Reconnect Voltage | >10.0 V (2.5V/Cell) |
Short Circuit Protection | 250 ~ 500 μs |
MECHANICAL PERFORMANCE | |
Dimension (L x W x H) | 151 x 99 x 101 mm,5.9 x 3.9 x 4.0” |
Approx. Weight | 2.9 lbs (1.3 kg) |
Terminal Type | F2 |
Case Material | ABS |
Enclosure Protection | IP65 |
TEMPERATURE PERFORMANCE | |
Discharge Temperature | -4 ~ 140 ºF (-20 ~ 60 ºC) |
Charge Temperature | 32 ~ 113 ºF (0 ~ 45 ºC) |
Storage Temperature | 23 ~ 95 ºF (-5 ~ 35 ºC) |
BMS High Temperature Cut-Off | 149 ºF (65 ºC) |
Reconnect Temperature | 131 ºF (55 ºC) |
COMPLIANCE | |
Certifications | CE (battery) |
UN38.3 (battery) | |
UL1642 & IEC62133 (cells) | |
Shipping Classification | UN 3480, CLASS 9 |
L mm(”) | W mm(”) | H mm(”) | HT mm(”) |
151 (5.9) | 98 (3.9) | 96 (3.8) | 101 (4.0) |
About US
An Innovative Manufacturer and Trusted Partner
Located in Maryland, USA and Shanghai, China, we are committed to promoting the development of green new energy. We have more than 20 years’ industry experience and professional technicians, dedicated to providing customized energy storage system solutions. We are mainly engaged in lithium-ion battery product series: single cell lithium-ion, battery pack, photovoltaic panel, indoor and outdoor solar energy storage power system, etc.
![]() | |||
Top Service | High Quality | OEM/ODM Customized | After Sales |
We will test all products and send test videos or pictures to customer for confirmation. | Our products have obtained UL, CE, UN38.3, MSDS, IEC and other international certifications. | More than 20 years industry experience, provide customized energy storage system solutions. | We are committed to providing you with high-quality, reliable products and services. |
FAQ
1: How can we guarantee quality?
A: Always a pre-production sample before mass production; Always final Inspection before shipment.
2: What can you buy from us?
A: lithium-ion single cell, battery pack, photovoltaic panel, indoor and outdoor solar energy storage power system, portable energy storage power system, etc.
3: Can you have a sample order?
A: Yes, we welcome sample order to test and check quality.
4: What about the lead time?
A: Sample needs 10-15 days, mass production time needs 5-8 weeks, it depends on order quantity.
5: How about you payment and delivery items?
A: Payment items: By T/T, 50% for deposit, and balance all before shipment. For small amount, we also accept payment via PayPal, Western Union.
6: What kind of certificates could you provide for these batteries?
A: We have CE,CB,KC,MSDS,UN38.3 for most our current products, if It's custom-making design, usually no current certificates, we could apply for you if you need, but the related fees should be paid by your side, and if your order is big enough, certificate fees can be refunded.