1.The 12V 80ah lifepo4 ups battery Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up servers and network storage devices, the lifepo4 ups battery switches to 1000W battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.
2.The lifepo4 ups battery internal battery more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100-percent capacity in less than two hours, making the lifepo4 ups battery an ideal backup in case of power outage,It provides about 8 hours of desk computer backup time.
3.The lifepo4 ups battery enables safe unattended system shutdown and file saves in case of a prolonged power failure.
Specification
Product model | YNTSUPS-1000 |
Battery | 12V 80Ah(1013WH) |
Output power | 1000W |
Input voltage | AC input: AC 110V~220V 50/60Hz;Solar /wind energy input: DC 13-30V input; vehicle input: 12V , without controller. |
Output voltage | 220V 50Hz / 110V 60Hz |
Dc output | Three 12V/4A; two USB5V/2.1A; one QC3.0; one TYPE-C; one (PD3.0 fast charge 5V/3A, 9V/2A, 12V/1.5A); |
Smart communication | 1 universal USB for computer data monitoring (mobile Internet monitoring function |
LED light | 1W |
Solar charging | 18V60W/ 120W (optional) |
Input Wave | Pure sine wave |
Outage response time | ≤5ms |
Transfer time | If overload, the AC output is disconnected, the indicator light is red, after disconnect the load, Then restart the UPS, then recover working normally |
Short circuit | when short circuit, the AC output is disconnected, disconnect the load, after disconnect |
lithium battery | More than 600 times for the cycle life |
Net weight | 8.9kg |
Gross weight | 10.2kg |
Product size | 380*160*168mm |
Packing size | 468*230*225mm |
Color | Silver/Gray/black (customized) |
Backup time
Equipment(Load) | YNTSUPS-1000 |
Cellphone 5V | More than 90 times |
LED lights 12V | 3W About 300 hours |
Desk computer | About 16 hours |
Ornamental fish tank | About 24 hours |
Laptop | About 22~24 hours |
Fan 50W | About 16 hours |
32-inch LCD TV | About 16 hours |
20W Energy saving lamps | About 46 hours |
Inverter refrigerator | About 24 hours |
500W Rice cooker | About 2-4 hours |
Automatically changeover switch after normal power off (uninterrupted power) |
Product display
Product overview(Back side)
As pictures shows, please plug the AC input power cable into the AC INPUT port before using it. Then connect the load , and turn on the AC output switch for normal use. When normal power is working, the normal power will working for the load. At the same time, the product is also charged. When the normal power off, it will automatically switch to the internal battery to supply power for the load.
Please note: When the unit connected with a load, the operating power of the load should not exceed the maximum output power of the unit. For example: the maximum output power of the unit is 600W, if the operating power of the load exceeds 600W, the power supply will enter the protection state and shut down the output. Only when the excess load is reduced and the unit is restarted, the output power can resume its normal power output. If a heavy load is connected to the unit, it may cause the AC fuse blow off.
Please replace the blown fuse with a 8A 250V fuse and verify the connected total load doesn’t exceed the maximum rated power of the unit before attempting to using the unit again.
When bring it for outdoor use, please turn off all switches at standby times, in order to miniumize the automatic consumption of the battery, only and turn them on when you need to use this UPS.
Solar charging description: As picture show “Solar charging input”, and the suitable solar panel pecification is 18V, 50W~120W.
When connecting the solar panel, pay more attention to the positive pole and negative poles, and they should correspondingly connect the positive and negative poles (internal positive and external negative), otherwise it cannot be charged.
e-USB intelligent computer data management and remote monitoring functions:
1. Install WinUPSmate communication management software on the computer
2. The computer pops up a friendly interface, Pls connect the data line between the computer and the UPS
3. The interface will show that the UPS has been connected normally and you can enter the intelligent data storage management
4. Install the APP app by scanning the QR code on the mobile phone interface
5. When the computer is connected to the Internet, the mobile phone can automatically
Certifications
About US
An Innovative Manufacturer and Trusted Partner
Located in Maryland, USA and Shanghai, China, we are committed to promoting the development of green new energy. We have more than 20 years’ industry experience and professional technicians, dedicated to providing customized energy storage system solutions. We are mainly engaged in lithium-ion battery product series: single cell lithium-ion, battery pack, photovoltaic panel, indoor and outdoor solar energy storage power system, etc.
![]() | |||
Top Service | High Quality | OEM/ODM Customized | After Sales |
We will test all products and send test videos or pictures to customer for confirmation. | Our products have obtained UL, CE, UN38.3, MSDS, IEC and other international certifications. | More than 20 years industry experience, provide customized energy storage system solutions. | We are committed to providing you with high-quality, reliable products and services. |
FAQ
1: How can we guarantee quality?
A: Always a pre-production sample before mass production; Always final Inspection before shipment.
2: What can you buy from us?
A: lithium-ion single cell, battery pack, photovoltaic panel, indoor and outdoor solar energy storage power system, portable energy storage power system, etc.
3: Can you have a sample order?
A: Yes, we welcome sample order to test and check quality.
4: What about the lead time?
A: Sample needs 10-15 days, mass production time needs 5-8 weeks, it depends on order quantity.
5: How about you payment and delivery items?
A: Payment items: By T/T, 50% for deposit, and balance all before shipment. For small amount, we also accept payment via PayPal, Western Union.
6: What kind of certificates could you provide for these batteries?
A: We have CE,CB,KC,MSDS,UN38.3 for most our current products, if It's custom-making design, usually no current certificates, we could apply for you if you need, but the related fees should be paid by your side, and if your order is big enough, certificate fees can be refunded.