High effective Flotation Cell Machine Separation, Copper Froth Flotation Process Machine

Introduction

Flotation machine is used for extracting of metals like gold, silver, iron, lead, zinc, molybdenum, nickel, tin, aluminum and so on. It is also suitable for extracting of ferrous metal metals and non-metals.

The impellers are driven through V-belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; on the other hand it stirs ore slurry and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board.

.

Features and Benefits:

1. Large inspiratory capacity, low power consumption;
2. Air and slurry are naturally sucked without need for foam pump;
3. Allocated horizontally is easy for changing the flow, reasonable circulation, and maximum reduction of the coarse sand aeration;
4. Automatic control device and convenient adjustment.

When the mine is grinding or after grinding, add water and necessary medicine produces the mine slurry after mixing, feed into the chute that begin to mix, add air into mine slurry to produce lots of bladder .The mine that not easily wet by water attaches the bladder and float to the surface of mine slurry together to produce the mineralized bladder floor .And the rest leaves in the mine slurry and discharges the mineralize bladder to reach the concentrating purpose.

Technical Parameters

This is mechanical mixing flotation machine by the impeller.
The machine is mainly made up by filling slurry chute, mixing device, inflatable device, the device of discharging mineralized bladder, motor etc.

The filling slurry chute: It has the feeding mouth and strobe device for adjusting the surface of mine slurry .It is made up by chute of jointing by armor plate and strobe of jointing by round steel.

The mixing device :It is used for mixing mine slurry to prevent the mine sand deposits at the bottom of chute .It is made up by strap wheel ,impeller ,upright axis etc, impeller is made of wearable rubber.

The device of discharging mineralized bladder: it scrapes the bladder that floats on the surface of the chute and is mainly made up by reducer, scrape board.

The inflatable device: It is made up by pipe and inflatable pipe .When impeller is turning, impeller cavity brings negative pressure ,which makes the air suck into by the empty pump and distributes in mine slurry to form the bladder .The mine slurry with bladder is thrown to stator by the turn force of impeller and makes bladder that in the mine slurry fine further and avoids the turn movement of mine slurry stream that in the chute ,produces lots of raising upright micro bladder and provides the necessity condition for flotation .