Shaker Table Vibration Machine Gold Separating NigeriaTable Top Large Capacity Shaker Chrome Vibrator Motor
Introduction
Shaking table widely used to separate gold, tin, tungsten, chromite, silver, diamond, zircon, cobalt, tantalum-niobium, lead, zinc, copper, antimony, other rare metal and noble metal ores.
Our new designed mineral shaking table is with better quality than normal 6s shaking table.
1. Higher and Thicker steel channel make it more durable.
2. PP material feeding trough more durable than normal steel material.
3. Have a protect cover for belt.
4. The shaking table surface add wear resistant coating.
5. More colors can choose from.
Working principle of Shaking Table Separation:
The working principle of Cobalt Shaker Table is separate the heavy material from light material by using their different
proportion & specific gravity, under the effect of gravity, the minerals will divide into the ore concentrate, the middling and
the tailing.
The prominent advantage of ore shaking table is precise separation.
The enrichment ratio of concentrate is very good, up to 95% high recovery ratio for kinds of heavy minerals, when dealing with low grade tungsten ore and tin ore, the enrichment ratio could reach about 300 times.
We can get some final concentrates, final tailings and 1 or 2 kinds of middling products after first separating from the feeding mineral.
Technical Parameters
Deck type | Unit | Course sand | Fine sand | Slime Deck | Three different kinds of decks are available | |||
Beneficiation Area | m2 | 7.6 | 7.6 | 7.6 | 4.08 | 1.95 | 0.5 | |
Deck Size | Length | mm | 4450 | 4450 | 4450 | 3000 | 2100 | 1100 |
transmission end width | mm | 1855 | 1855 | 1855 | 1320 | 1050 | 500 | |
Concentrate end width | mm | 1546 | 1546 | 1546 | 1100 | 850 | 430 | |
Maximum Feeding Size | mm | 2 | 0.5 | 0.15 | 0.1-2 | 0.074-2 | 0.074-2 | |
Feeding Amount | t/d | 30-60 | 10-20 | 15-25 | 0.4-1.5t/h | 0.3-0.8t/h | 0.05-0.2t/h | |
Feeding Density | % | 25-30 | 20-25 | 15-25 | 10-30 | |||
Stroke | mm | 16-22 | 11-16 | 8-16 | 6-30 | 12-28 | 9-17 | |
Frequency | f | 45-48 | 18-53 | 50-57 | 210-320 | 250-450 | 280-460 | |
Water added | t/d | 80-150 | 30-60 | 10-17 | 0.3-1.5t/h | 0.2-1t/h | 0.1-0.5t/h | |
Transverse slope of Deck | ° | 2° 30-4° 30 | 1° 30-3° 30 | 1° -2° | 0 -10° | 0 -8° | 0 -10° | |
Longitudinal slope of Deck | ° | 1.4 | 0.92 | ------ | ------ | ------ | ------ | |
Cross-section Shape of Deck | rectangular | saw tooth | triangle | Avaliable rectangular, saw tooth, triangle |