Model 1200B China gold mine wet pan mill price in Sudan for sale

Introduction

1200B model wet pan mill is widely used for selecting ferrous metals,nonferrous metals and nonmetals,as well asprecious metals like gold and silver.Based on advanced technology and first-class after-sales service,The Nile 1200B wet pan mill is the first choice for ore beneficiation plant with all levels.

Gold wet pan mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore. Above all, 1200a type is the most popular and widely use.

Mill Working Principle

Wet pan mill mainly consists of driving device,frame,water basin,grinding wheels and grinding base ,etc.It grinds ores by wheel driving force:firstly,the power is transferred from the motor to the reducer,then to the horizontal shaft ,and finally to the grinding wheel;the wheels then rotate anticlockwise.The wheels can revolve around the vertical shaft of the pan mill,at the same time,it can revolve on its own axis,while the grinding base will remain still.The ores are then pressed,rubbed and grinded repeatedly.

A. Only when the wet pan mill/ gold ore grinding machine run smoothly then start to feed the raw material into the grinding pan.
B. The gold grinding machine/wet pan mill is prohibite to start work with raw material inside, it must clean the residual ore in the middle of grinding pan and then start the machine.
C. Uniform feeding, shall not be more and less, it will be better to use the feeding machine.
D. Bearing parts must often add grease oil and gear oil.
E. Often check if the screw is loose.
F. If found the bearing is damage, pls change it timely just in case the eccentric shaft damage other components.
G. When the machine is on work, pls pay attention to the reducer and bearing part, to find if it has some abnormal noise, high temperature and high motor current accurs is not allowed. Once it happens, the machine should stop working immediately.
H. When repair the machine, pls remove the V-belt to keep the machine in a safe condition.

Technical Parameters

;

Part views

Chrome material roller:Introduction of core technology ,wear-resisting improve>130%,the surface is smooth and without porosity