Cyclone Water Separators

YUKA Filtration offers a range of Compressed Air Water Separators with proven cyclone technology and ahead-thinking housing design that drives market leading water removal efficiencies.

Our Compressed Air Water Separators are available in a broad range of models with connection sizes ranging from 1/2” to DN125”Rc (BSP Taper).

YUKA Filtration Water Separators have a maximum operating temperature of 176 ˚F (80˚C), an operating pressure of up to 142.85 psig (10 barg), and flow capacities up to 85 SCFM (144 Nm³/hr) up to 1766 SCFM (300 Nm³/hr).

Used to remove bulk liquid following the compression of air, installing a Water Separator reduces the risk of contamination to production equipment, product spoilage, and costly shutdowns caused by damage of high levels of moisture and condensate in the system.

Working Principle

The compressed air gas-water separator is composed of a housing, a cyclone separator, and sewage components. When the compressed air containing a large amount of oil and water solid impurities enters the separator, it spins down along its inner wall. The centrifugal effect produced causes the liquid water to separate out of the vapor stream and flow down the wall. Under the action of gravity, it flows into the separator. The bottom of the device is discharged by the Automatic Drain Valve.

Feature & Benefit

①99% Separation efficiency from compressed air system

②Zero pressure drop, saving energy and money

③Internal & external anti-corrosion treatment, increase spanlife and ensure separation efficiency

④With Strong structure, 15 years warranty, cost reasonable

Technical Specification

The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g). For the application in other working pressure, please refer to the correction factors.

Product Parts

Success Case