Stainless Steel air filter are important items of filtration requirements in a compressed air system,which are designed not only to filter oil vapor and water, but also to filter solid particulates to an acceptable level as small as 0.01micron in size. Usually, in the installation system, the first filter's purpose is to pre-filter, protect the high efficiency filters from bulk contamination so as to provide high quality compressed air. If the compressed Air Filters worked under damp or full of water adsorption condition, it would prevent the compressed air from getting through the filter element and the air low would force the liquid to get through from the pores of the element media. Thus increase working pressure drop and reduce filtration performance.
Feature & Advantage
· 304 & 314 stainless steel material in die-casted integrated technology, housing warranty with 15 years.
· Design for harsh and complex working environment, low maintenance and repaired fee.
· Stainless steel Filter Element material, double support mesh, prevent second pollution from itself.
· Filtration performance meet ISO8573.1-2010 standard, particle removal accuracy down to 1 micron.
Technical Specification
Model | Connection | Flow rate | Dimension (mm) | ||||
L/S | m³/min | scfm | Width (W) | Depth (D) | Height (H) | ||
BHL030 | 25 | 25.1 | 1.5 | 53.0 | 150.0 | φ76 | 250 |
BHL080 | 40 | 66.8 | 4.0 | 141.2 | 170.0 | φ108 | 390 |
BHL145 | 40 | 116.9 | 7.0 | 247.1 | 170.0 | φ108 | 530 |
BHL220 | DN65 | 183.7 | 11.0 | 388.3 | 220.0 | φ133 | 700 |
BHL260-330 | DN80 | 250.5 | 15.0 | 529.5 | 320.0 | φ133 | 980 |
BHL360 | 334.0 | 20.0 | 706.0 | ||||
BHL430 | DN80 | 450.9 | 27.0 | 953.1 | 360.0 | φ159 | 850 |
BHL620 | DN100 | 467.6 | 28.0 | 988.4 | 360.0 | φ159 | 1080 |
BHL800 | DN100 | 835.0 | 50.0 | 1765.0 | 420.0 | φ219 | 1180 |
BHL1000 | DN125 | 1002.0 | 60.0 | 2118.0 | 473.0 | φ273 | 1203 |
BHL1200 | DN125 | 1336.0 | 80.0 | 2824.0 | 473.0 | φ273 | 1203 |
BHL1400 | DN150 | 1670.0 | 100.0 | 3530.0 | 530.0 | φ325 | 1280 |
BHL1600 | DN150 | 2505.0 | 150.0 | 5295.0 | 580.0 | φ377 | 1350 |
BHL1800 | DN200 | 3340.0 | 200.0 | 7060.0 | 630.0 | φ426 | 1450 |
BHL2000 | DN200 | 4175.0 | 250.0 | 8825.0 | |||
BHL2200 | DN250 | 5010.0 | 300.0 | 10590.0 | 720.0 | φ500 | 1550 |
BHL2400 | DN250 | 5845.0 | 350.0 | 12355.0 | |||
Technical Requirement | Maxi.pressure:16barg, Maxi.working temperature:80℃, Mini working Temperature : 1.5℃ |
Pressure | Barg | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
Psig | 15 | 29 | 44 | 59 | 73 | 87 | 100 | 116 | 131 | 145 | 160 | 174 | 189 | 203 | 219 | 232 | |
Correction factor | 0.38 | 0.53 | 0.65 | 0.76 | 0.85 | 0.93 | 1.00 | 1.07 | 1.13 | 1.19 | 1.23 | 1.31 | 1.36 | 1.41 | 1.46 | 1.51 |
Filtration Grade | PF | AO | AA | AX | ACS | AR | AAR |
Size of solid particles(ISO12500-3) | 5μm | 1μm | 0.01μm | 0.01μm | - | 1μm | 0.01μm |
Filtration performance of solid particles(ISO12500-3) | - | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% |
Filtration performance of oil(ISO12500-1) | 50% | 80+% | 99.9+% | 99.99+% | - | - | - |
Residual oil content(ISO12500-1) | 5mg/m³ | 0.6mg/m³ | <0.01mg/m³ | <0.001mg/m³ | <0.004mg/m³ | - | - |