Pre-air filter for Atlas Copco Air Compressor YD405
In order to meet the strict requirements of modern industry and the requirements of the ISO8573.1:2001 international standard for compressed air quality levels, high-quality filter media are used in compressed Air Filters. However, the life and dirt holding capacity of this filter media are limited. When the life of the filter expires, the quality of the compressed air is no longer protected. The filter is installed to obtain compressed air that meets the specified quality requirements. Therefore, providing stable compressed air that meets the quality requirements is the main reason for replacing the Filter Element. The replacement of the filter element is based on the manufacturer's prompts to obtain compressed air that meets the requirements.
For more questions about how to choose a filter, how to maintain the filter, how long should the filter be maintained, and how the filter works, please contact us by email or phone.
So you need a Compressed Air Filter, but how to select the most suitable compressed air filter for your application? Let's figure out the filter type.
Air Filter Types:
①Particulate compressed air filters are used to remove dust and particles from the air.
②Coalescing filters are used mainly to capture oil and/or moisture that is suspended in the compressed air in very tiny droplets.
③Activated carbon filters remove (oil) odors and vapors.
Feature & Benefit
① 15 year guaranty for air filter housing under working condition from temperature 1.5ºC~80ºC. Maxi. Pressure is 1.0 Mpa.
② 6000~8000 hours span life for filter element, filtering performance up to 99.99%
③ Integrated die-casting filter up to 3 inch, flow rate up to 37.2m³/min.
④ Alternative for Dominick Hunter Oil X Plus Series.
⑤ Configuration: Differential pressure indicator, sight glass, auto drain.
Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 bar g (100psi g). For application in other working pressure, please refer to the correction factors.